Pearlbond™ 1160L by Lubrizol is a linear, aromatic, Toluene-free, thermoplastic polyurethane (TPU) grade. Exhibits high crystallisation rate, high thermoplasticity level and high wettability. The films provide bonds with high initial values and good heat resistance. It is used for obtaining PU films by extrusion (blow and cast) processing for solvent-free adhesion, by heat-seal process. Pearlbond™ 1160L by Lubrizol is used in production of hot melt adhesives (HMAs), PVC co-extrusion, typically used in PU film applications and fabrics.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
Pearlbond™ 1160L properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 100% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| 300% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Softening Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Pearlbond™ 1160L Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Cylinder Zone 1 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 2 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 3 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 4 Temp. | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Extruder Speed | Visible After Login | Visible After Login | |
| L/D Ratio | Visible After Login | Visible After Login | |
| Screw | Visible After Login | Visible After Login | |