KER 3007K by Kumho P&B Chemicals is a solid epoxy resin. Offers low and consistent hydrolyzable (or saponifiable) chlorine contents. It is mainly used where hardening at room temperature is required and is insoluble in water. Recommended for stoved coatings, can coatings & primer coating for pre-coated metal (PCM) applications. KER 3007K is suitable for paints for ships & heavy-duty coating, air-drying epoxy esters, heat-induced hardening of powders, molding powders, printed circuit boards (PCB) & EMC in electric and electronic devices applications.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Availability
Product Status:Visible After Login
KER 3007K properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flash Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Color, APHA | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| pH | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Epoxy Equivalent Weight (WPE) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Epoxy Group Content (EGC) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |