KRATON® G1652 MU by KRATON is a clear white, thermally stable, linear triblock copolymer based on styrene and ethylene/butylene (SEBS) with a polystyrene content of 30%. Exhibits insolubility in water, high strength, low compression set, good ozone resistance and low viscosity. It is odorless and available in North America as an undusted powder. Used as a modifier of bitumen & polymer and as an ingredient in formulating compounds for footwear applications. Suitable for adhesives, sealants, and coating applications. Applications include general consumer and industry applications. KRATON® G1652 MU complies with FDA, REACH, AICS, Canadian DSL, IECSC, EINECS, ENCS, KECI, NZIoC, PICCS, NECI and TSCA inventory.
Product family:
Product Type:
| Bio Based content | Visible After Login |
| CI Name | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Availability
Product Status:Visible After Login
KRATON® G1652 MU properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 300% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Volatile Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Anti-oxidant | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Polystyrene Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Styrene/Rubber ratio | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Total Extractables | 0.0 Visible After Login | Visible After Login | Visible After Login |