Keripol RW 1411 by Hexion is a styrene-free, polyester grade reinforced with glass fiber and inorganic filler. Exhibits high viscosity flow, low shrinkage and good dimensional stability. Offers resistance to tracking (at 600V), high temperature and heat. Designed for processing by compression and injection molding. Keripol RW 1411 is recommended for H4 lampholders.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Keripol RW 1411 properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Dielectric Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dissipation Factor | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Proof tracking index (Test liquid A) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Surface Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Volume Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Dielectric Constant | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Apparent density (Molding compound) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Cure Time | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Cure Time | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Post shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Heat Deflection Temperature Under Load (HDT - C) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Keripol RW 1411 Processing Guidelines
Compression/Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Mold Temperature | Visible After Login | Visible After Login | |
| Molding Pressure (Cavity) | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Barrel Temperature - Feed Zone | Visible After Login | Visible After Login | |
| Barrel Temperature - Nozzle Zone | Visible After Login | Visible After Login | |
| Holding Pressure (% of Injection Pressure) | Visible After Login | Visible After Login | |
| Temperature of material | Visible After Login | Visible After Login | |