Technical datasheet
PET EN220-001
Supplied byGuangdong Shunde Shunyan New Material- Last Updated on Feb 14, 2024
PET EN220-001 by Guangdong Shunde Shunyan New Material is a polyethylene terephthalate (PET) grade reinforced with 20 % glass fiber. Exhibits high impact strength, and high voltage resistance. Is suitable for processing by injection molding. PET EN220-001 is recommended for coil skeleton, and home appliance accessories. It complies with the UL 94 V0 flame rating.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
PET EN220-001 properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| High Voltage Test | 0.0 Visible After Login | Visible After Login | Visible After Login |
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flame Rating | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption | 0.0 Visible After Login | Visible After Login | Visible After Login |
PET EN220-001 Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Center Barrel Temperature | Visible After Login | Visible After Login | |
| Front Barrel Temperature | Visible After Login | Visible After Login | |
| Injection Temperature | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Pre-Drying Temperature | Visible After Login | Visible After Login | |
| Pre-drying Time | Visible After Login | Visible After Login | |
| Rear Barrel Temperature | Visible After Login | Visible After Login | |