Technical datasheet

Durethan® B 30 S 000000

Supplied byEnvalior- Last Updated on Jan 7, 2025

Durethan® B 30 S 000000 by Envalior is polyamide 6 (PA 6) grade by Lanxess. Possesses good electrical insulation properties, high mechanical strength and high stiffness. Exhibits good toughness, low friction, dynamic load bearing properties and good processability. Provides high wear-, abrasion-, shock and fracture resistance and the attenuation of noise and vibration. Shows high resistance to heat (170 to 200 °C over the short term; 80 to 160 °C long-term) and chemicals such as fuels, lubricants, solvents and cleaning agents. Suitable for processing by injection molding. Durethan® B 30 S 000000 is used in automotive, electrical/ electronics, buildings & constructions industries. Complies with REACH (Regulation EC No. 1907/2006) and RoHS.
Product family:
Polyamide (PA) / Nylon
Chemical family:
PA 6 (Nylon 6)|
Polyamide (PA) / Nylon
Product Type:
Thermoplastics
Bio Based contentVisible After Login
ColorVisible After Login
AppearanceVisible After Login
Unlock for free

Benefits

Visible After Login|

Visible After Login|

Visible After Login

Unlock for free

Compliance

Certifications & Compliance
Visible After Login
Unlock for free

Applications

Recommended markets

Conversion mode

Visible After Login|
Visible After Login|
Visible After Login
Unlock for free

Availability

Product Status:Visible After Login
Unlock for free

Durethan® B 30 S 000000 properties

Electrical properties

PropertiesValue & unitTest conditionTest method
Comparative Tracking Index (CTI)0.0 Visible After LoginVisible After LoginVisible After Login
Dielectric Strength0.0 Visible After LoginVisible After LoginVisible After Login
Dissipation Factor0.0 Visible After LoginVisible After LoginVisible After Login
Surface Resistivity0.0 Visible After LoginVisible After LoginVisible After Login
Volume Resistivity0.0 Visible After LoginVisible After LoginVisible After Login
Unlock for free

Flammability properties

PropertiesValue & unitTest conditionTest method
Glow Wire Flammability Index (GWFI)0.0 Visible After LoginVisible After LoginVisible After Login
Limiting Oxygen Index (LOI)0.0 Visible After LoginVisible After LoginVisible After Login
Unlock for free

Mechanical properties

PropertiesValue & unitTest conditionTest method
Film Puncture Maximum Force0.0 Visible After LoginVisible After LoginVisible After Login
Film Puncture Maximum Force0.0 Visible After LoginVisible After LoginVisible After Login
Flexural Modulus0.0 Visible After LoginVisible After LoginVisible After Login
Flexural Strain0.0 Visible After LoginVisible After LoginVisible After Login
Flexural Strength0.0 Visible After LoginVisible After LoginVisible After Login
Flexural Stress0.0 Visible After LoginVisible After LoginVisible After Login
Impact Strength, Notched Charpy0.0 Visible After LoginVisible After LoginVisible After Login
Impact Strength, Notched Charpy0.0 Visible After LoginVisible After LoginVisible After Login
Impact Strength, Notched Izod0.0 Visible After LoginVisible After LoginVisible After Login
Modulus of Elasticity0.0 Visible After LoginVisible After LoginVisible After Login
Nominal Tensile Strain at Break0.0 Visible After LoginVisible After LoginVisible After Login
Tensile Strain0.0 Visible After LoginVisible After LoginVisible After Login
Unlock for free

Other properties

PropertiesValue & unitTest conditionTest method
Density, Bulk0.0 Visible After LoginVisible After LoginVisible After Login
Dielectric Constant0.0 Visible After LoginVisible After LoginVisible After Login
Dielectric Constant0.0 Visible After LoginVisible After LoginVisible After Login
Hardness, Ball Indentation0.0 Visible After LoginVisible After LoginVisible After Login
Impact Strength, Puncture0.0 Visible After LoginVisible After LoginVisible After Login
Impact Strength, Puncture0.0 Visible After LoginVisible After LoginVisible After Login
Tensile Strength at Yield0.0 Visible After LoginVisible After LoginVisible After Login
Unlock for free

Physical properties

PropertiesValue & unitTest conditionTest method
Density0.0 Visible After LoginVisible After LoginVisible After Login
Linear Mold Shrinkage, Flow0.0 Visible After LoginVisible After LoginVisible After Login
Linear Mold Shrinkage, Transverse0.0 Visible After LoginVisible After LoginVisible After Login
Water Absorption at Saturation0.0 Visible After LoginVisible After LoginVisible After Login
Unlock for free

Thermal properties

PropertiesValue & unitTest conditionTest method
CTE, Linear, Parallel to Flow0.0 Visible After LoginVisible After LoginVisible After Login
CTE, Linear, Transverse to Flow0.0 Visible After LoginVisible After LoginVisible After Login
Decomposition Temperature0.0 Visible After LoginVisible After LoginVisible After Login
Deflection Temperature at 0.46 MPa (66 psi)0.0 Visible After LoginVisible After LoginVisible After Login
Deflection Temperature at 1.8 MPa (264 psi)0.0 Visible After LoginVisible After LoginVisible After Login
Deflection Temperature at 8.0 MPa0.0 Visible After LoginVisible After LoginVisible After Login
Ignition Temperature0.0 Visible After LoginVisible After LoginVisible After Login
Melting Point0.0 Visible After LoginVisible After LoginVisible After Login
Vicat Softening Temperature0.0 Visible After LoginVisible After LoginVisible After Login
Vicat Softening Temperature0.0 Visible After LoginVisible After LoginVisible After Login
Unlock for free

Durethan® B 30 S 000000 Processing Guidelines

Injection Molding Processing Guidelines

PropertiesValue & unitTest conditionTest method
Drying TemperatureVisible After LoginVisible After Login
Drying TimeVisible After LoginVisible After Login
Moisture ContentVisible After LoginVisible After Login
Mold TemperatureVisible After LoginVisible After Login
Permitted Residence TimeVisible After LoginVisible After Login
Processing TemperatureVisible After LoginVisible After Login
Unlock for free

Related products