Akulon® F130-C1 by Envalior is a lubricated, medium viscosity polyamide 6 grade. It has good food contact quality and offers good chemical resistance to various solvents. Used in consumer goods and packaging for sterilized surgical devices. Suggested for biaxially oriented films (BOPA) for cheese-, fish-, meat- and medical packaging applications. Akulon® F130-C1 is suitable for processing by cast film extrusion.
Product family:
Chemical family:
Product Type:
| CAS Number | Visible After Login |
| Bio Based content | Visible After Login |
Documents related to Akulon® F130-C1
(1)
Compliance
| Food Contact Approval | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Akulon® F130-C1 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Coefficient of Friction (COF) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Coefficient of Friction (COF) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Maximum Strain | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Maximum Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Puncture Resistance | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Transparency/Clarity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity, Intrinsic | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity, Melt | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Gas Transmission Rate, Oxygen | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Gas Transmission Rate, Oxygen | 0.0 Visible After Login | Visible After Login | Visible After Login |
| RSV Formic Acid | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Vapor Transmission Rate (WVTR) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| CTE, Linear, Parallel to Flow | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Heat Capacity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Heat Capacity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Akulon® F130-C1 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Chill Roll Temperature | Visible After Login | Visible After Login | |
| Dew Point | Visible After Login | Visible After Login | |
| Die Gap | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Extruder Temperature | Visible After Login | Visible After Login | |
| Flight Depth Ratio | Visible After Login | Visible After Login | |
| Haul Off Speed | Visible After Login | Visible After Login | |
| L/D Ratio | Visible After Login | Visible After Login | |
| Moisture Content | Visible After Login | Visible After Login | |
| Screw Length | Visible After Login | Visible After Login | |