Technical datasheet
AFFINITY™ PF 1146Q Polyolefin Plastomer
Supplied byDow- Last Updated on May 27, 2025
AFFINITY™ PF 1146Q Polyolefin Plastomer by Dow is a polyolefin plastomer (POP) resin. It is produced by INSITE technology. It provides low consistent coefficient of friction (COF) of less than 0.2 for a ~1.0 mil sealant layer in a coextruded film. It is used in high-speed packaging applications that require a low seal initiation temperature and excellent machinability.
- It is designed to run fast and trouble-free on most extrusion equipment, including blown film dies with narrow die gaps.
- It is suitable for use as the sealant layer in multilayer films.
- AFFINITY™ PF 1146Q Polyolefin Plastomer is recommended for packaging of fresh-cut produce, dry foods and other vertical form-fill seal applications.
- It complies with U.S. FDA FCN 424, EU No 10/2011 and Canadian HPFB No Objection.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
AFFINITY™ PF 1146Q Polyolefin Plastomer properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 2% Secant Modulus, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| 2% Secant Modulus, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Puncture Force | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Puncture Resistance | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Clarity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Puncture | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Seal Initiation Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
AFFINITY™ PF 1146Q Polyolefin Plastomer Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Blow-up Ratio | Visible After Login | Visible After Login | |
| Die Gap | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |