POLYFLON™ PTFE M-18 BY Daikin is a general purpose, filled, fluorinated polytetrafluoroethylene (PTFE) homopolymer grade. It complies with FDA 21 CFR.177.1550, ISO 9001 (Quality System), ISO 14001 (Environmental System) and Responsible Care 14001 (Safety, Health, Environment and Security).
- It exhibits excellent low temperature strength, low coefficient of friction, non-stick, thermal, mechanical and electrical properties.
- It shows dielectric constant, dissipation factor which are uniformly low over a wide frequency range, resistance to corrosion and chemicals.
- It is recommended for packings, gaskets, diaphragms, bellows, linings, piping components, pump parts, O-rings, V-rings, bushings, slide bearings, electrical and insulating skived tape.
- POLYFLON™ PTFE M-18 is used in insulating sleeves, terminals, connectors, sockets, spacers, electronic parts, laboratory equipment and thin film skiving.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
POLYFLON™ PTFE M-18 properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Dielectric Breakdown Voltage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dielectric Constant | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dielectric Loss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Surface Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Volume Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compressive Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compressive Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compressive Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| MIT Flex Life | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Stretching Void Index (SVI) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density, Bulk | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Maximum Service Temperature, Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |