Tefzel™ ETFE HT-2202 by Chemours is a hydrolytically stable ethylene tetrafluoroethylene (ETFE) fluoroplastic grade. Promotes adhesion between polyamide and ETFE. Possessses good toughness & dielectric properties and high impact strength. Exhibits chemical inertness & weather and abrasion resistance. Tefzel™ ETFE HT-2202 can be processed by melt extrusion & injection, compression, transfer and blow-molding. Used in electrical components such as sleeving, coil forms, sockets, connectors & switches, lab ware, multi-layer tubing, valves, containers, fasteners, battery and instrument components. Meets the U.S. Environmental Protection Agency (EPA) 2010/15 PFOA regulations.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Tefzel™ ETFE HT-2202 properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Limiting Oxygen Index (LOI) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Elongation, Ultimate | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Maximum Service Temperature, Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Tefzel™ ETFE HT-2202 Processing Guidelines
Extrusion/Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Temperature | Visible After Login | Visible After Login | |