Technical datasheet
Ultrafuse TPE 60D
Supplied byBASF 3D Printing Solutions- Last Updated on Jan 25, 2021
Ultrafuse TPE 60D (Old Name: InnoFlex 60) by BASF 3D Printing Solutions is thermoplastic elastomer based filament for fused filament fabrication. It is made from Ecovio® and completely biodegradable plastic & suitable for 3D printing. It is designed for printing flexible parts like miniature tires, drive belts, bracelets and parts. Ultrafuse TPE 60D has minimum shelf life of 12 months. The use of hot air dryer and vacuum oven is recommended for drying.
Product family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Ultrafuse TPE 60D properties
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Ultrafuse TPE 60D Processing Guidelines
3D Printing Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Bed Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Nozzle Diameter | Visible After Login | Visible After Login | |
| Nozzle Temperature | Visible After Login | Visible After Login | |
| Print Speed | Visible After Login | Visible After Login | |