FS-3511 by Avantor is a two-part, translucent fluoro silicone rubbers (FMQ) grade. It consists of two parts (A:B in 1:1) ratio. Offers medium hardness and solvent resistance. It contains 100 mol % fluorosilicone and cures rapidly with heat. It is suitable for processing by liquid injection molding and extrusion. It can be used for O-rings, gaskets, seals & precision molded parts and for molding high quality parts at rapid rates. FS-3511 complies with RoHS and REACH (European Union 1907/2006) regulations.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
FS-3511 properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flash Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Hardness, Shore | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
FS-3511 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Extrusion Rate | Visible After Login | Visible After Login | |
| Extrusion Rate | Visible After Login | Visible After Login | |
| Work Time | Visible After Login | Visible After Login | |