Technical datasheet
Star L PPS 30Y D51F
Supplied byAscend Performance Materials- Last Updated on Nov 4, 2025
Star L PPS 30Y D51F by Ascend Performance Materials is a polytetrafluoroethylene (PTFE) lubricated polyphenylene sulfide (PPS) reinforced with carbon fiber. Offers good impact performance, low coefficient of friction, low cost, noise and vibration reduction. Exhibits good heat, wear and excellent chemical resistance. Star L PPS 30Y D51F is suitable for processing by injection molding. Complies with ISO 9001, ISO/ TS 16949:2009 and ISO 14001:2004 certifications.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
Star L PPS 30Y D51F properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Stress | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Unnotched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage, Flow | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Heat Deflection Temperature (HDT) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Star L PPS 30Y D51F Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Barrel- Zone 1 Temperature | Visible After Login | Visible After Login | |
| Barrel- Zone 2 Temperature | Visible After Login | Visible After Login | |
| Barrel- Zone 3 Temperature | Visible After Login | Visible After Login | |
| Barrel- Zone 4 Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Moisture Content (Max) | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |