Kepstan® 6010G30 by Arkema is a pseudo-amorphous, low flow, high-performance, glass fiber reinforced, polyetherketoneketone (PEKK) grade. Exhibits low melting point and slow crystallization behavior, leading to glassy or semi crystalline structures, depending on processing technologies and cooling conditions. It is designed to meet the requirements of a broad range of processing technologies, including compression and injection molding, film extrusion, profile- and sheet extrusion. Kepstan® 6010G30 possible applications include connectors, fittings, components, and injection molded parts of automotive and transportation; connectors E&E, chemical industry and general industry.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
Kepstan® 6010G30 properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Limiting Oxygen Index (LOI) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Volume Flow Rate (MVR) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Kepstan® 6010G30 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Barrel - Zone 1 Temperature | Visible After Login | Visible After Login | |
| Barrel - Zone 2 Temperature | Visible After Login | Visible After Login | |
| Barrel - Zone 3 Temperature | Visible After Login | Visible After Login | |
| Barrel - Zone 4 Temperature | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Center Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Front Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Nozzle Temperature | Visible After Login | Visible After Login | |
| Processing Temperature | Visible After Login | Visible After Login | |
| Rear Temperature | Visible After Login | Visible After Login | |