Ionomers for Plastic Parts

HiFill® TPX-IONOMER-02055 BK by Techmer PM is an ionomer grade reinforced with 40% glass fiber. Is suitable for processing by injection molding.

SURLYN™ PC-2000 CIR Ionomer by Dow is a sustainable ionomer of ethylene acid copolymer produced from mixed plastic waste. It pioneers the use of renewable and circular feedstocks. It exhibits high gloss & transparency, superior scratch and chemical resistance.

• It offers properties that give the unique look, feel, performance, free design and decoration.
• It is used in packaging for the cosmetic industry such as perfume caps, cream jars, personal care pots.
• It is suitable for processing by injection molding.
• SURLYN™ PC-2000 CIR Ionomer is TSCA and ISCC Plus certified.

SURLYN™ PC-2000 REN Ionomer by Dow is an ionomer of ethylene acid copolymer. It exhibits high gloss & transparency, superior scratch and chemical resistance. It pioneers the use of renewable and circular feedstocks and produced from bio-waste such as used cooking oil (UCO). It offers properties that gives the unique look, feel, performance, free design and decoration.

• It is used in packaging for the cosmetic industry such as perfume caps, cream jars, personal care pots.
• It is suitable for processing by injection molding.
• SURLYN™ PC-2000 REN Ionomer is TSCA listed and ISCC Plus certified.

CLARIX® 111901-01 Clear by LyondellBasell is a sodium ionomer grade. It exhibits good sealant properties, high gloss and good clarity. This grade offers excellent UV-, puncture-, chemical-, scratch- and mar resistance. It is processed by injection molding, blown-, cast- and coextruded film applications. CLARIX® 111901-01 Clear is used in packaging and foil lamination.

CLARIX® 210901-01 Clear by LyondellBasell is zinc ionomer grade. It exhibits good sealant properties, high gloss and good clarity. Offers excellent UV-, puncture-, chemical-, scratch- and mar resistance. CLARIX® 210901-01 Clear is suitable for processing by injection molding and compounding extrusion applications. It is used in packaging and foil lamination.

CLARIX® 210805-01 Clear by LyondellBasell is a zinc ionomer grade. It exhibits good sealant properties, high gloss and good clarity. This grade offers excellent UV-, puncture-, chemical-, scratch- and mar resistance. It is processed by injection molding, blown-, cast- and coextruded film applications. CLARIX® 210805-01 Clear is used in packaging and foil lamination.

SURLYN™ PC-2000 Ionomer by Dow is a sodium ionomer. It offers crystal-like transparency, high gloss, superior scratch- and chemical resistance. It provides endless packaging possibilities with a wall thickness above 5 mm. It is suitable for processing by injection molding.

• It is recommended for beverage caps, cosmetic packaging, such as perfume caps & cream jars, personal care caps and pots.
• SURLYN™ PC-2000 Ionomer complies with FDA 21 CFR 177.1330 (a), EU Directive 2012/19/EU (WEEE), TSCA, GB 4806.1-2016, EN 71-3, EU Directive 2011/65/EU (RoHS) and conforms to CONEG & EU 94/62/EC.

SURLYN™ 1605SBR Ionomer by Dow is a cost-effective ionomer of ethylene acid copolymer with slip, anti-block and chill roll release properties. It offers outstanding clarity, toughness, abrasion resistance and ability to downgauge.

• It provides low seal initiation temperature, high toughness at low temperature, oil barrier and very high hot tack.
• It is suitable for processing by extrusion coating, conventional blown film-, cast film-, sheet extrusion and coextrusion.
• It is recommended for processed meat packaging, medical device forming webs, crystal clear fragrance caps, pouches and sachets and other high-performance films.
• SURLYN™ 1605SBR Ionomer complies with FDA 21 CFR 177.1330 (a), TSCA, FDA 21 CFR 175.105, GB 4806.1-2016, EN 71-3, EU Directive 2011/65/EU (RoHS) and conforms to CONEG, EU 94/62/EC.

SURLYN™ 8920 Ionomer by Dow is a sodium ionomer of ethylene acid copolymer. It offers toughness, thermoformability, high transparency, very high stiffness and chemical resistance. It acts as a nucleating agent for PET compounds. SURLYN™ 8920 Ionomer is suitable for processing by blow molding, injection molding and sheet extrusion. It is designed for golf balls and wood plastic composites. It complies with TSCA, EU Directive 2012/19/EU (WEEE) & EU Directive 2011/65/EU (RoHS) and conforms to CONEG & EU Directive 94/62/EC.

SURLYN™ 8320 Ionomer by Dow is a sodium ionomer of ethylene acid acrylate terpolymer. It is a very soft, PET impact modifier. It has low glass transition temperature and low melting temperature and exhibits exceptionally low-temperature impact performance. It is suitable for processing by injection molding, conventional extrusion and sheet extrusion. SURLYN™ 8320 Ionomer is recommended for golf ball modification. It complies with TSCA, EU Directive 2012/19/EU (WEEE), EU Directive 2011/65/EU (RoHS) and conforms to CONEG & EU Directive 94/62/EC.