Plastics and elastomers for Wiring & Cables

SILTEM™ Resin STM1500 (Europe) by SABIC is a PFAS-free, flexible polyetherimide(PEI)-siloxane copolymer for cable and wire coatings. Offers high tensile elongation, chemical resistance- & heat resistance and good dimensional stability. It is a non-halogenated flame retardant grade. Exhibits low corrosivity & toxicity and smoke emission. SILTEM™ Resin STM1500 (Europe) can be processed by extrusion. Used in aerospace, defense, mass transportation like rail, electronics, material handling, electricals and industrial material handling. Complies with RoHS and UL 94 V-1 flame rating.

FLEX NORYL™ Resin WCD883A (Americas) by SABIC is a PFAS-free, flexible, thin-walled, non-reinforced, non-halogenated and flame retarded extrudable blend of polyphenylene ether (PPE) and thermoplastic elastomer (TPE). It exhibits low warpage, superior thermal stability, very low water & moisture absorption, good electrical properties and low specific gravity. It is a creep and impact resistant, non-chlorinated and non-brominated grade. It offers hydrolytic & dimensional stability and good processability. The processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor. FLEX NORYL™ Resin WCD883A (Americas) is recommended for electrical and electronic applications such as mobile phones, computers & tablets. It is suitable for wire extrusion coatings. It meets EN 50265-2-1 requirements. It is developed for evaluation in AC cable jacket applications such as HD 21.14 flexible cables that require EU VDE and dark color.

FLEX NORYL™ Resin WCD795 (Americas) by SABIC is a PFAS-free, flexible, thin-walled, non-reinforced, non-halogenated and flame retarded blend of polyphenylene ether (PPE) and thermoplastic elastomer (TPE). It is a non-chlorinated and non-brominated grade. It exhibits low warpage & moisture absorption, superior thermal stability, dimensional stability, very low water absorption, good electrical properties and low specific gravity. It offers hydrolytic stability, low creep sensitivity, good processability. FLEX NORYL™ Resin WCD795 (Americas) is suitable for processing by wire extrusion coating. It meets UL VW-1 requirements, 105°C end-use temperature rating and heat deformation performance as defined by UL 1581. It is intended for evaluation in AC cable jacket applications that require UL62 SVE and NISPE configurations at 90°c or 105°c temperature rating and black color. It is recommended for electrical and electronic applications such as mobile phones, computers & tablets.

FLEX NORYL™ Resin WCD944 (Europe) by SABIC is a PFAS-free, flexible, low warpage, thin-walled, non-reinforced, creep resistant, extrudable blend of polyphenylene ether (PPE) and thermoplastic elastomer (TPE). It is a non-halogenated, flame retarded, non-chlorinated and non-brominated grade. It exhibits superior thermal stability, very low water & moisture absorption, good electrical properties and low specific gravity. It offers dimensional stability, hydrolytic stability and good processability. It is used in electronic & electrical applications such as mobile phones, computer and tablets. FLEX NORYL™ Resin WCD944 (Europe) is processed by wire extrusion coating. It meets EN 50265-2-1 requirement and is IEC 60754 compliant. It is intended for evaluation in wire and cable applications such as optical fiber cable jacketing.

FLEX NORYL™ Resin WCD801A (Americas) by SABIC is a flexible, low warpage, impact & creep resistant, PFAS-free, migration-improved, thin-walled, non-reinforced, non-halogenated and flame retarded extrudable blend of polyphenylene ether (PPE) and thermoplastic elastomer (TPE). It is a non-chlorinated and non-brominated grade. It exhibits superior thermal stability, very low water & moisture absorption, good electrical properties and low specific gravity. It offers hydrolytic & dimensional stability. FLEX NORYL™ Resin WCD801A (Americas) is used in electrical and electronic applications such as mobile phones, computers and tablets. It is suitable for processing by wire extrusion coating. It meets UL VW-1 requirements, 80°C end-use temperature rating, and heat deformation performance as defined by UL 1581. It is suitable for wire insulation and cable jacket applications in dark colors.

FLEX NORYL™ Resin WCD841U (Europe) by SABIC is a flexible, PFAS-free, low war page, UV-stabilized, thin-walled, non-reinforced, non-halogenated, flame retarded, extrudable blend of polyphenylene ether (PPE) and thermoplastic elastomer (TPE). It is a creep and impact resistant, non-chlorinated and non-brominated grade. It exhibits superior thermal stability, very low water & moisture absorption, good electrical properties, low specific gravity and good color stability after UV weathering. It offers dimensional & hydrolytic stability and good processability. It is used in electronics and electrical applications. FLEX NORYL™ Resin WCD841U (Europe) is suitable for processing by wire extrusion coating. It is recommended for mobile phones, computes and tablets. It meets UL VW-1 requirements, 80C end-use temperature rating and heat deformation performance as defined by UL 1581. It is suitable for wire insulation and cable jacket applications in light colors.

FLEX NORYL™ Resin WCD855 (Americas) by SABIC is a PFAS-free, unfilled, impact resistant, halogen free flame retarded polyphenylene ether (PPE) and thermoplastic elastomer (TPE) blend. It exhibits superior thermal stability, low war page, very low water & moisture absorption, good electrical properties and low specific gravity. It is a flexible, creep resistant, non-brominated and non-chlorinated grade. It offers dimensional stability, hydrolytic stability and good processability. It is also recommended for mobile phones, computers and tablets. FLEX NORYL™ Resin WCD855 (Americas) is processed by wire extrusion coating. Recommended for thin-walled applications, AC cable jacket applications that require UL62 at 90C or 105C temperature rating and black color, electrical and electronic applications. It meets UL 1581 VW-1 requirements.

SILTEM™ Resin STM1600 (Europe) by SABIC is a PFAS- & halogen-free (according VDE 0472), flame retardant, flexible polyetherimide (PEI) - siloxane copolymer designed for wire and cable applications. It offers low smoke emission, energy management and toxicity. It is an amber colored transparent material that can be self-colored and easily processed on conventional equipment. SILTEM™ Resin STM1600 (Europe) is suitable for flexible profiles and injection molded parts. It is processed by extrusion. It is recommended for aerospace, electrical and electronics, mass transportation such as rail, industrial, material handling & defense applications.

FLEX NORYL™ Resin WCD891B (Americas) by SABIC is a PFAS-free, impact & creep resistant, non-reinforced, non-halogenated and flame retarded blend of polyphenylene ether (PPE) and thermoplastic elastomer (TPE). It exhibits low warpage, superior thermal stability, very low water & moisture absorption and low specific gravity. It offers hydrolytic stability and good processability. It is a non-chlorinated and non-brominated grade. Provides flexibility, dimensional stability and good electrical properties. It is used in electronic and electrical industrial applications such as mobile phones, computers and tablets. FLEX NORYL™ Resin WCD891B (Americas) is suitable for processing by wire extrusion coating. It meets UL VW-1 requirements, 80°C end-use temperature rating as well as heat deformation performance as defined by UL 1581. It is intended for evaluation in wire and cable applications in dark colors.

FLEX NORYL™ Resin WCD815U (Americas) by SABIC is a PFAS-free, flexible, UV stabilized, thin-walled, non-reinforced, non-halogenated and flame retarded extrudable blend of polyphenylene ether (PPE) and thermoplastic elastomer (TPE). It exhibits low warpage, superior thermal stability, very low water & moisture absorption, good electrical properties and low specific gravity. It is an impact & creep resistant, non-chlorinated and non-brominated grade. It offers hydrolytic & dimensional stability and good processability. It is used in electronics and electrical industrial applications such as mobile phones, computers and tablets. FLEX NORYL™ Resin WCD815U (Americas) is suitable for processing by wire extrusion coating. It meets UL 1581 VW-1 requirements. It is intended for evaluation in AC cable jacket applications that require UL62 at 90°C temperature rating and light color. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.