Plastics and elastomers for Transportation (excl. Automotive)

LEXAN™ Copolymer XHT1171 (Americas) by SABIC is a PFAS-free, non-reinforced, heat stabilized polycarbonate (PC) copolymer blend. It provides high heat resistance, mold release and high flow. It is processed by injection molding. It enables high aesthetics, thin wall and complex designs. It is used in consumer goods like lighting, appliances such as home and commercial, mass transportation like recreational and specialty vehicles. It is suitable for defense, outdoor, lawn and landscape applications, automotive interiors, exteriors and under the hood. It is suggested for water management, personal accessory, pharmaceutical, food and beverage, building and construction. It is also used in aerospace, industrial material handling, healthcare such as surgical, patient testing, medical facility infrastructure, fluid and blood handling. LEXAN™ Copolymer XHT1171 (Americas) is recommended for ophthalmics, electronics, electrical devices, displays, components and infrastructure.

LEXAN™ Copolymer SLX2571T (Europe) by SABIC is a PFAS-free, transparent, high viscosity, flame retarded, heat stabilized polycarbonate (PC) copolymer blend. It shows enhanced UV stabilization, weatherability. It is an unreinforced and V2-rated grade. It is suitable for processing by extrusion blow molding. LEXAN™ Copolymer SLX2571T (Europe) is recommended for electrical and electronics, recreational vehicle and consumer applications such as lighting.

CYCOLOY™ FR Resin CX7211 (Americas) by SABIC is a non-chlorinated & brominated, flame-retardant polycarbonate and acrylonitrile butadiene styrene (PC+ABS) blend. It is suitable for processing by injection molding and is used for thin wall applications. It exhibits medium flow, hydrolytic stability, good mold release and chemical resistance. CYCOLOY™ FR Resin CX7211 (Americas) is used in electrical devices & displays, specialty vehicles, rail, sleep therapy, lighting, energy storage, home appliances, electrical components, patient testing, fluid, blood handling, mass transportation, healthcare, electronics and consumer applications. Complies with UL 94 V-0, 5VA and 5VB flame rating.

ULTEM™ resin 1000 by SABIC is amorphous, transparent, flame-retarded polyetherimide (PEI) grade. It is metallizable and transparent to microwave radiation & near IR. Provides high stiffness, strength, hydrolytic stability, low creep sensitivity, shrinkage, good metal adhesion, low smoke and toxicity. Offers radiation resistance (gamma, x-ray), chemical-, UV-C resistance, high electric breakdown strength (BDS) and high heat resistance. Exhibits excellent mechanicals in broad temperature range, good dimensional stability and excellent electrical properties. ULTEM™ resin 1000 is suitable for processing by additive manufacturing, injection compression molding, compression molding, foam-, film- & profile extrusion, injection molding, extrusion blow molding and extrusion compounding. Used in rigid packaging, aircraft interiors, defense, outdoor, lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays, specialty vehicles, ophthalmics, rail, wind energy, sport/leisure, consumer packaging. It is also recommended for personal accessory, textile, lighting, energy storage, home appliances, servomotor, bus, electronic, electrical components, industrial, automotive under the hood, commercial appliance and recreational vehicle. Complies with RoHS, UL94 V-0, V-2 and 5V ratings and aerospace FAR 25.853. The natural, uncolored, material is halogen-free according to standards IEC 61249-2-21, IPC 4101E and JEDEC JS709B. The base material is transparent amber colored but is also available in custom colors- transparent and opaque.
ISCC+ certified bio-based version also available for this grade.

LEXAN™ COPOLYMER EXL1414 (Asia) by SABIC is a PFAS-free, impact resistant, polycarbonate (PC) siloxane copolymer resin. It is a medium flow grade that can be processed by injection molding (IM). It offers extreme low temperature (-40 C) ductility in combination with excellent processability and release with opportunities for shorter IM cycle times compared to standard PC. LEXAN™ COPOLYMER EXL1414 (Asia) is available in wide range of opaque colors. It is recommended for automotive interiors, under the hood, exteriors and recreational/specialty vehicles. It is suitable for building components, construction & water management and consumer applications like sports/leisures, personal accessory, home- & commercial appliances and personal recreation. It is designed for use in electrical industry, defense and electronic applications such as mobile phones, computers and tablets. It is used in surgical devices, general healthcare & patient testing.

LEXAN™ Copolymer XHT1171 (Europe) by SABIC is a PFAS-free, non-reinforced, heat stabilized polycarbonate (PC) copolymer blend. It offers high heat resistance, mold release and high flow. It is processed by injection molding. It enables high aesthetics, thin wall and complex designs. It is suitable for defense, outdoor, lawn and landscape applications, automotive interiors, exteriors and under the hood. It is suggested for water management, personal accessory, pharmaceutical, food and beverage, building and construction. It is used in consumer goods like lighting, appliances such as home and commercial, mass transportation like recreational and specialty vehicles. LEXAN™ Copolymer XHT1171 (Europe) is also used in aerospace, industrial material handling, healthcare such as surgical, patient testing, medical facility infrastructure, fluid and blood handling. It is recommended for ophthalmics, electronics, electrical devices, displays, components and infrastructure.

LEXAN™ Copolymer SLX2571T (Asia) by SABIC is a PFAS-free, transparent, non-reinforced, flame retarded, heat stabilized polycarbonate (PC) copolymer blend. It offers weatherability and enhanced UV stabilization. It is a high viscosity and V2 rated grade. It can be processed by extrusion blow molding. LEXAN™ Copolymer SLX2571T (Asia) is recommended for electrical and electronics, recreational vehicle and consumer applications such as lighting.

LEXAN™ COPOLYMER EXL1112T (Americas) by SABIC is a general purpose, unfilled polycarbonate (PC) siloxane copolymer. It provides good low temperature (-20°C) ductility, high flow and excellent processability. It is a heat-stabilized grade offering high impact resistance and mold release with shorter cycle times compared to standard PC resins. It is available in wide range of transparent and opaque colors. Applications include electrical devices & displays, home appliances, electrical components & infrastructure, consumer, electrical and electronics. LEXAN™ COPOLYMER EXL1112T (Americas) is suitable for processing by injection molding.

LEXAN™ COPOLYMER EXL1112 (Asia) by SABIC is a PFAS-free, high flow, heat-stabilized, unreinforced polycarbonate (PC) siloxane copolymer. It offers excellent low temperature impact and mold release with shorter IM cycle times as compared to standard PC. It combines good low temperature ductility (-20°C) with excellent processability. It is available in wide range of opaque colors. Recommended for defense, water management, electrical devices & displays, specialty vehicles, personal accessory, electrical components & infrastructure, automotive lighting, industrial, building & construction, electrical & electronics, mass transportation, consumer and automotive applications. LEXAN™ COPOLYMER EXL1112 (Asia) is suitable for processing by injection molding.

LEXAN™ COPOLYMER EXL1112T (Asia) by SABIC is a general purpose, PFAS-free, high flow, heat-stabilized, unreinforced polycarbonate (PC) siloxane copolymer. It exhibits mold release with shorter IM cycle times as compared to standard PC. It offers high impact resistance, good low temperature ductility (-20°C) with excellent processability. It is available in wide range of transparent and opaque colors. Recommended for electrical devices & displays, home appliances, electrical components & infrastructure, consumer, electrical and electronics. LEXAN™ COPOLYMER EXL1112T (Asia) is suitable for processing by injection molding.