Plastics and elastomers for Telecom

ForTii® XS81B by Envalior is PPA (PA 4T) grade reinforced with 50% glass fiber. It is suitable for processing by injection molding. It offers excellent impact resistance, high stiffness and good chemical resistance. It exhibits good processing ability that allows high cosmetic requirements and good bonding in the various painting process. It is recommended for mobile phone middle frame applications due to low warpage and excellent performance in tumbling tests. ForTii® XS81B is used in antenna splitters, camera holders, free-form camera housing, medium voltage circuit breakers and medium voltage circuit breakers embedded pole.

NORYL™ Resin PX9406 (Europe) by SABIC is a PFAS-free, heat stabilized & unreinforced polyphenylene ether (PPE) and polystyrene (PS) resin. It shows improved productivity and reliability along with high heat resistance, hydrolytic stability, low warpage, low shrinkage, low moisture absorption, low specific gravity and dimensional stability.

• This injection moldable grade contains non-brominated & non-chlorinated flame retardant.
• NORYL™ Resin PX9406 (Europe) is used in building component, commercial appliance, mobile phone, computer, tablets, electrical and defense applications.

ULTEM™ resin CRS5311 (Americas) by SABIC is an amorphous, PFAS-free, flame retarded polyetherimide (PEI) reinforced with 30% glass fiber. It provides low shrinkage, good metal adhesion, high strength, high heat resistance and good dimensional stability. It offers low smoke & toxicity, good mechanicals in broad temperature range and low creep sensitivity.

• It exhibits easy flow, high stiffness and hydrolytic stability.
• It shows enhanced chemical resistance to strong acids, bases, aromatics, and ketones.
• It is suitable for processing by injection molding.
• ULTEM™ resin CRS5311 (Americas) is recommended for automotive (heavy truck, automotive under the hood, aerospace, motorcycle, recreational/specialty vehicle), building & construction (building component), consumer (personal accessory, home & commercial appliance).
• It is used in electrical & electronics (energy management, drone solutions, mobile phone, computer, tablets, circuit boards/additives, printer copier, speaker and earphone), industrial (material handling), industrial packaging and mass transportation (rail).
• It complies with UL 94 V-0 & UL 94 5VA flame rating and ECO regulations.

ULTEM™ resin ATX200F (Americas) by SABIC is an amorphous, PFAS-free, high flow, flame retardant polyetherimide (PEI) blend. It provides high stiffness, hydrolytic stability, chemical resistance and good mechanicals in broad temperature range.

• It offers high impact resistance, good dimensional stability, low toxicity and smoke evolution.
• It exhibits low creep sensitivity, low shrinkage, good metal adhesion, high strength and high heat resistance.
• It is suitable for processing by injection molding.
• It is used in heavy truck, automotive under the hood, aerospace, motorcycle, recreational/specialty vehicles, building component, water management, consumer goods, sport/leisure, personal accessory, home appliances, commercial appliance, furniture, energy management, drone solutions, mobile phone, computer, tablets, circuit boards/additives, lighting, printer copier, speaker, earphone and wireless communication.
• It is also used in personal and professional hygiene, pharmaceutical packaging & drug delivery, surgical devices, general healthcare, patient testing, electrical, material handling, textile, eyewear, rail and industrial packaging.
• ULTEM™ resin ATX200F (Americas) complies with US FDA, UL 94 V-0 flame rating and conforms to ECO regulations.

NORYL™ Resin PX2938 by SABIC is a PFAS-free, blend of polyphenylene ether (PPE) and polystyrene (PS) reinforced with 20% glass fiber. It is processed by injection molding and extrusion.

• It contains non-brominated, non-chlorinated flame retardant.
• It exhibits high heat resistance, high impact strength, high stiffness/strength, low warpage, low shrinkage, dimensional stability, hydrolytic stability and very low moisture absorption.
• NORYL™ Resin PX2938 is used in building component, water management, mobile phone, computer, tablets, patient testing, electrical and industrial applications such as cooling fans.

NORYL™ Resin PX9406 (Americas) by SABIC is a PFAS-free, heat stabilized & unreinforced polyphenylene ether (PPE) and polystyrene (PS) resin. This injection moldable grade contains non-brominated & non-chlorinated flame retardant.

• It shows improved productivity and reliability along with high heat resistance, hydrolytic stability, low specific gravity, low warpage, low shrinkage, low moisture absorption, and dimensional stability.
• NORYL™ Resin PX9406 (Americas) is used in building component, commercial appliance, mobile phone, computer, tablets, electrical and defense applications.

ULTEM™ resin CRS5311 (Asia) by SABIC is a flame retardant, PFAS-free, amorphous polyetherimide (PEI) reinforced with 30% glass fiber. It provides good metal adhesion, high strength, high heat resistance and good dimensional stability. It offers low smoke & toxicity, good mechanicals in broad temperature range and low creep sensitivity.

• It exhibits low shrinkage, easy flow, high stiffness and hydrolytic stability.
• It shows enhanced chemical resistance to strong acids, bases, aromatics, and ketones.
• It is suitable for processing by injection molding.
• ULTEM™ resin CRS5311 (Asia) is used in automotive (heavy truck, automotive under the hood, aerospace, motorcycle, recreational/specialty vehicle), building & construction (building component), consumer (personal accessory, home & commercial appliance).
• It is recommended for electrical & electronics (energy management, drone solutions, mobile phone, computer, tablets, circuit boards/additives, printer copier, speaker and earphone), industrial (material handling), industrial packaging and mass transportation (rail).
• It complies with UL 94 V-0 & UL 94 5VA flame rating and ECO regulations.

ULTEM™ resin CRS5311 (Europe) by SABIC is an amorphous polyetherimide (PEI) copolymer filled with 30% glass fiber. It is PFAS-free, high flow grade with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. It provides low shrinkage, good metal adhesion, high strength, high heat resistance and good dimensional stability.

• It offers low smoke & toxicity, good mechanicals in broad temperature range and low creep sensitivity.
• It exhibits high stiffness and hydrolytic stability.
• It is suitable for processing by injection molding.
• ULTEM™ resin CRS5311 (Europe) is used in automotive (heavy truck, automotive under the hood, aerospace, motorcycle, recreational/specialty vehicle), building & construction (building component), consumer (personal accessory, home & commercial appliance).
• It is recommended for electrical & electronics (energy management, drone solutions, mobile phone, computer, tablets, circuit boards/additives, printer copier, speaker and earphone), industrial (material handling), industrial packaging and mass transportation (rail).
• It complies with UL 94 V-0 & UL 94 5VA flame rating and ECO regulations.

ULTEM™ resin CRS5001 (Americas) by SABIC is a transparent, PFAS-free, amorphous, high flow, flame retardant polyetherimide (PEI) copolymer. It exhibits enhanced chemical resistance to strong acids, bases, aromatics, and ketones. It offers low smoke & toxicity, good mechanicals in broad temperature range and low creep sensitivity.

• It provides high strength, high heat resistance, low shrinkage and good dimensional stability.
• It is suitable for processing by injection molding.
• It is used in automotive (heavy truck, automotive under the hood, aerospace, motorcycle, recreational/specialty vehicle), building & construction (building component), consumer (personal accessory, home appliances and commercial appliance).
• It is recommended for electrical & electronics (energy management, drone solutions, mobile phone, computer, tablets, circuit boards/additives, printer copier, speaker and earphone), industrial (material handling), industrial packaging and mass transportation (rail).
• ULTEM™ resin CRS5001 (Americas) is UL 94 V-0 flame rated and conforms to ECO regulations.

LNP™ LUBRICOMP™ Compound WFL28 by SABIC is internally lubricated polybutylene terephthalate (PBT) resin reinforced with 40% glass fiber and 10% PTFE. It offers wear resistance, high stiffness and strength. It is suitable for processing by injection molding. LNP™ LUBRICOMP™ Compound WFL28 is used in enclosure, housing & cover, building component, sport & leisure, personal accessory, home & commercial appliances, electrical, electronics, mobile phone, computer and tablets.