Plastics and elastomers for Hydraulic Power Equipment

Grivory® HT3Z LF Black 9564 by EMS-Grivory (EMS Group) is a palatable, impact resistant, PTFE modified polyphthalamide (PPA) grade based on semi crystalline partially aromatic co-polyamide. Is produced by monomers obtained through chemical processes from the renewable raw material castor oil. The PTFE (polytetrafluoroethylene) modification reduces the sliding friction after a short initial phase. Exhibits low moisture absorption, high stiffness, high heat distortion temperature, hydrolysis-, heat- and alcohol resistance. Is suitable for processing by injection molding. Grivory® HT3Z LF Black 9564 is used in automotive applications like air intake-, compressed air-, hydraulic- and fuel systems, cooling and climate control, interior, powertrain and chassis, electrical appliances, in housewares & consumer good applications like hydraulics & pneumatics, power transmission and engineering tools. Complies with REACH, RoHS and WEEE.

Grilamid® L 25 W 20 X by EMS-Grivory (EMS Group) is a semi-flexible, plasticized, high viscosity polyamide 12 (PA 12) grade. Is formed by the polymerisation of laurolactam (lactam 12, obtained from the basic raw material butadiene), a ring-shaped, long-chain monomer with 12 carbon atoms. Is an impact modified, heat and UV stabilized grade. Exhibits low water absorption, excellent dimensional stability, high resistance to chemicals, hydrolysis, heat and weathering. Possesses lowest density among all polyamides, low weight, exceptional impact strength at low temperatures and easy processability. Grilamid® L 25 W 20 X is suitable for processing by extrusion. Used in automotive compressed air-, hydraulic- and fuel systems, cables & semi-flexible tubes and in hydraulics & pneumatics. Complies with REACH, RoHS and WEEE.

Grilamid® L 16 Natural by EMS-Grivory (EMS Group) is a nucleated, low viscosity, heat and UV stabilized polyamide 12 (PA 12) grade. Is formed by the polymerisation of laurolactam (lactam 12, obtained from the basic raw material butadiene), a ring-shaped, long-chain monomer with 12 carbon atoms. The modification with a crystallization regulator causes a quickly freeze and a fine, crystalline structure. Exhibits low water absorption, excellent dimensional stability, high resistance to chemicals, hydrolysis, heat and weathering. Possesses lowest density among all polyamides, high impact strength down to -40°C and easy processability. Shows good flowability and de-molding. Grilamid® L 16 Natural is suitable for processing by injection molding. Used in electrical equipment, connectors, housewares & consumer good applications like hydraulics & pneumatics, in engineering tools and sports & leisure. Complies with REACH, RoHS and WEEE.

LATAN 13 G/30 by LATI is a polyoxymethylene (POM) copolymer based compound reinforced with 30% glass fibers. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses very good tribological properties, high dimensional stability, mechanical properties, stiffness, thermal stability, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical- , wear-, oxidation- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 13 G/30 is suitable for applications in hot water up to 80-90°C. LATAN 13 G/30 can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors.

Grilamid® TRVX-50X9 Natural by EMS-Grivory (EMS Group) is an amorphous, cycloaliphatic polyamide 12 (PA 12) grade reinforced with 50% glass fiber. Possesses good impact resistance, very high flexural fatigue strength, high stiffness, good toughness even at low temperatures and good dimensional stability. Provides very low distortion, minor sink mark tendency, low flash tendency, good chemical resistance. Offers low moisture absorption, low water absorption compared to standard polyamides, high heat distortion temperature and easy processability with good melt flow. Is suitable for processing by injection molding. Used in automotive applications like cooling and climate control, powertrain and chassis, electrical appliances and equipment, housewares, heating systems, hydraulics & pneumatics, mobile phones and other portable devices, engineering tools, power transmission and medical devices. It is also used in telecommunications and construction. Grilamid® TRVX-50X9 Natural complies with REACH, RoHS and WEEE.

LATAN 9 by LATI is an unfilled polyoxymethylene (POM) copolymer. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses very good tribological properties, high mechanical properties, stiffness, thermal stability, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical-, wear-, oxidation- and hydrolysis-resistance. LATAN 9 is suitable for processing by injection molding. Parts made from 9 is suitable for applications in hot water up to 80-90°C. Can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors.

LATAN 13 K/30 by LATI is a polyoxymethylene (POM) copolymer based compound reinforced with 30% carbon fibers. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses good thermal stability, stiffness, toughness, very good self-lubricating-, tribological- and mechanical-properties. Exhibits low moisture absorption, good inertness, good chemical- , wear-, oxidation- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 13 K/30 is suitable for applications in hot water up to 80-90°C. LATAN 13 K/30 can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors.

LATAN 13 S/20 by LATI is a polyoxymethylene (POM) copolymer based compound reinforced with 20% glass beads. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses high dimensional stability, high mechanical properties, thermal stability, stiffness, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical-, wear-, oxidation- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 13 S/20 is suitable for applications in hot water up to 80-90°C. LATAN 13 S/20 can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors.

LATAN 13E71 by LATI is a polyoxymethylene (POM) copolymer. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Provides good elongation and impact resistance. Possesses high mechanical properties, thermal stability, stiffness, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical- , wear-, oxidation- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 13E71 is suitable for applications in hot water up to 80-90°C. LATAN 13E71 can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors.

LATAN 13 by LATI is an unfilled polyoxymethylene (POM) copolymer. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses very good tribological properties, high mechanical properties, thermal stability, stiffness, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical- , wear-, oxidation- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 13 is suitable for applications in hot water up to 80-90°C. LATAN 13 can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors.