Supplier Page
Wacker
OverviewProducts257Brands22Products families19News10

VINNAPAS® (Coating ingredients)

Supplied by Wacker
VINNAPAS® by Wacker is a versatile range of polymer dispersions, powders, and resins used to enhance paint and coating performance. These grades deliver high binding power and flexibility for improved adhesion.

Key features of VINNAPAS® brand include:

  • Extremely high binding power
  • Excellent flexibility and adhesion promotion
  • Compatible with multiple substrates
  • Available as dispersions, powders, and resins

73 Products match your search

VINNAPAS® SAF 72

by Wacker

Dispersion of a special copolymer of styrene and acrylic acid ester, produced without ammonia and providing maximum freedom in the choice of coalescing agent. It is a fine-particle polymer. It is free of solvents and plasticizers. Has excellent pigment-binding capacity, very good adhesion to inorganic substrates and excellent shear stability at pH value above 7.5, therefore is easy to process. Film produced from this dispersion have excellent resistance to water and alkalis, with only slight water absorption and greatly delayed whitening. Also possesses medium viscosity and high pseudoplasticity. It responds well to small amounts of thickening agents. Recommended applications include exterior dispersion based coating and roof coating.
See the product

VINNAPAS® 8034H

by Wacker

VINNAPAS® 8034H by Wacker is a flexible dispersible terpolymer powder based on vinyl chloride, ethylene and vinyl laurate with strong hydrophobic effect and good workability. Performs as binder and hydrophobizing agent. When blended with inorganic binders, the resin will provide improved adhesion, flexural strength, deformability and abrasion resistance and are easier to process. It is suitable for formulating compounds that must exhibit good very good water repellency. VINNAPAS® 8034H is used in skim coats on walls and in EIFS.
See the product

VINNAPAS® 7034 E

by Wacker

VINNAPAS® 7034 E by Wacker is a general-purpose, flexible, odorless, water-dispersible, polyvinyl alcohol (PVOH) terpolymer based on vinyl acetate, ethylene and vinyl ester. Produced without the addition of organic solvents, plasticizers and film-forming agents. Contains a fine mineral filler as an antiblocking agent. Compatible with other mortar additives. Exhibits excellent workability, good processability, low emissions and good adhesion. Offers good flexural strength in bending, deformability, abrasion resistance. VINNAPAS® 7034 E is suitable for patching compounds and skin coats for walls, cement-based and cement-free powder paints. Recommended for finishes, base-coat and one-coat for renders/ plasters/ stucco, top-coat & finishes for external thermal insulation composite systems (ETICS/ EIFS). Complies with ECL, ENCS, NZIoC, AICS, DSL, PICCS, TSCA, TCSI, REACH, GHS and CLP.
See the product

VINNAPAS® 7031 H

by Wacker

VINNAPAS® 7031 H by Wacker is a flexible dispersible terpolymer powder based on vinyl acetate, ethylene and vinyl ester with hydrophobic effect and very good workability. Compounds modified with VINNAPAS® 7031 H exhibit improved adhesion, flexural strength, deformability, abrasion resistance and are easier to process. Leveling, thixotropy and water retention are essentially unaffected. It is a hydrophobizing dispersible polymer powder in the lower Tg range. Used in skim coats for walls.
See the product

VINNAPAS® EF718

by Wacker

VINNAPAS® EF718 by Teda Golone Chemical is vinyl acetate ethylene emulsion. It can be employed as an alternative to vinegar acrylic- and styrene acrylic emulsion. It has surfactant as protective colloid. VINNAPAS® EF718 is recommended for water-borne traditional- and low odor coating.
See the product

VINNAPAS® EZ3010

by Wacker

VINNAPAS® EZ3010 by Teda Golone Chemical is vinyl acetate ethylene emulsion. It has cellulose/surfactant as a protective colloid. VINNAPAS® EZ3010 is used in the preparation of water-borne paint and interior wall coating.
See the product

VINNAPAS® 558ED

by Wacker

VINNAPAS® 558ED by Teda Golone Chemical is vinyl acetate ethylene emulsion. It acts as an interface agent. It is applicable in JS water-borne coatings. VINNAPAS® 558ED has poly vinyl alcohol as protective colloid.
See the product

VINNAPAS® EP706K

by Wacker

VINNAPAS® EP706K by Teda Golone Chemical is vinyl acetate ethylene emulsion. It is recommended for water-borne coatings. VINNAPAS® EP706K has poly vinyl alcohol as protective colloid.
See the product

VINNAPAS® EP707K

by Wacker

VINNAPAS® EP707K by Teda Golone Chemical is vinyl acetate ethylene emulsion. It is applicable in water-borne coatings. VINNAPAS® EP707K has poly vinyl alcohol as protective colloid.
See the product

VINNAPAS® EP709

by Wacker

VINNAPAS® EP709 by Teda Golone Chemical is vinyl acetate ethylene emulsion. It has poly vinyl alcohol as protective colloid. VINNAPAS® EP709 is used in water-borne decorative coatings.
See the product
Showper page

Most Popular Brands

VINNAPAS®

by Wacker

73 products
See All Products

SILRES®

by Wacker

56 products
See All Products

VINNOL®

by Wacker

26 products
See All Products

GENIOSIL®

by Wacker

25 products
See All Products