Return to supplier page
JADEWIN FP127 by Qingdao Jade New Material Technology is a 4,4'-bis(2-methoxystyryl)-1,1'-biphenyl. Acts as a optical brightener. Exhibits beneath properties and good thermal & light stability. Offers increased whiteness and exceptional brightness. Soluble in most organic solvents and compatible with polymers. Compatible with thermoplastic polyurethane (TPUR). Especially suitable for serial products of polyvinyl chloride. JADEWIN FP127 can be used in colored coatings, printing inks and varnishes. JADEWIN UV NP3 by Qingdao Jade New Material Technology is a N,N'-Bis(4-ethoxycarbonylphenyl)-N benzylformamidine. Acts as a high molecular weight ultraviolet (UV) light absorber. Provides high thermal stability, very good light absorbing characteristics, good compatibility & solubility with various polymers & solvents. Offers softness and makes the foam comfortable enough for good affinity to skin. JADEWIN UV NP3 is an excellent choice for all coatings where low color characteristics and stability are ideal for use in combination with the newest generation photoinitiators to provide durable UV clear coats. Has better synergistic effect with JADEWIN LS123 in automobile coatings, against gloss reduction, crack, bubble and discolor. Widely used in waterborne, solvent-borne, and 100% solids automotive and industrial finishes. JADEWIN UV NP3 is listed in AICS, DSL, EINECS, IECSC, ENCS, ECL, TSCA and PICCS. The recommended percentage is 0.5 %-2.0 % depending on specific application and test results. JADEWIN UV327 by Qingdao Jade New Material Technology is a 2-(2'-hydroxy-3',5'-di-tert-butylphenyl)-5-chlorobenzotriazole. Acts as strong ultraviolet (UV) light absorber (in the 290~400 nm region). Possesses high degree of photo-stability (photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy). Exhibits good initial color, low volatility, excellent stability to heat and light, superior wash fastness. The low pKa and high hindrance of the phenolic group result in low sensitivity to metal containing ingredients in polymer formulation - catalysts residues & metallic driers. Compatible with polypropylene and polyethylene as well as cold cured polyesters & polyurethanes. JADEWIN UV327 is particularly suitable for dyes, and pigments. Can be used in combination with phenolic &phosphite antioxidants, and HALS to optimize performance in outdoor use. Listed in AICS, DSL, IECSC, EINECS, ENCS, ECL, PICCS and TSCA. JADEWIN UV 571 by Qingdao Jade New Material Technology is a 2-(2H-Benzotriazol-2-yl)-6-dodecyl-4-methyl-phenol. Acts as a liquid ultraviolet absorber (UVA) of the hydroxy phenyl benzotriazole class. Exhibits low volatility and good thermal stability with strong UV absorption even at high temperature. It has good compatibility and solubility with many solvents, monomers and intermediates and can be incorporated in the process of polymerization. Suitable for use in coatings. JADEWIN UV 571 is listed in AICS, DSL, EINECS, IECSC, ENCS, ECL, TSCA and PICCS. JADEWIN UV 400 by Qingdao Jade New Material Technology acts as a ultraviolet (UV) light absorber. It exhibits low color & stability and offers durability. It has better synergistic effect with JADEWIN LS123 against gloss reduction, crackle, bubble and discolor. It is ideal for use in combination with newest generation photoinitiators for UV curable clear coats. JADEWIN UV 400 is widely used in waterborne, solvent-borne and 100% solids automotive and industrial finishes. Its recommended dosage is 1-3% depending on coating system. JADEWIN BP-1 by Qingdao Jade New Material Technology is a 2,4-dihydroxybenzophenone. Acts as a ultraviolet (UV) light absorber (280 – 320 nm range). Offers prevention of yellowing and improvement of optical and mechanical properties (transparent extruded sheet). Provides improvement of fastness to weathering and retardation of aging. Compatible with polymers such as alkyd & phenolic resins, polymethacrylates (PMMA), polystyrene (PS) and epoxy resin/unsaturated polyesters. Soluble in common organic solvents. JADEWIN BP-1 is used in fluorescent paints for road marking and traffic signs. Listed in AICS, DSL, EINECS, IECSC, ENCS, ECL, TSCA and PICCS. JADEWIN UV 531L by Qingdao Jade New Material Technology is a 2-hydroxy-4-n-octoxybenzophenone. Acts as ultraviolet (UV) light absorber (in the 240~340 nm region). Exhibits synergy with HALS, good light stability effect and offers better long-term performance. The liquid appearance makes it easier to be dispersed into monomer. Is compatible with PE, PP, PVC, PS, PC, PP fiber & ethylene vinyl acetate, polyurethanes and rubbers. JADEWIN UV 531L shows excellent solubility and compatibility with high solid paints & coating formulations. Listed in AICS, DSL, IECSC, EINECS, ENCS, ECL, PICCS and TSCA. Dosage ranges from 0.1 to 0.5% based on polymer weight. JADEWIN BP-4 by Qingdao Jade New Material Technology is a 2-Hydroxy-4-methoxybenzophenone-5-sulfonic acid. Acts as a ultraviolet (UV) light absorber with wide absorption band (280–360 nm range). The acid group need to be o be neutralized with one of the usual neutralizing agents, such as, triethanolamine and NaOH. Improves the weatherability and is soluble in water. Used in water borne coatings and water based dyes. JADEWIN BP-4 is listed in AICS, DSL, EINECS, IECSC, ENCS, ECL, TSCA and PICCS. JADEWIN AN 1024 by {supplier is a 1,2-Bis (3,5-di-tert-butyl-4-hydroxyhydrocinnamoly) hydrazine. Acts as a metal deactivator and antioxidant. Exhibits extraction resistance and is effective in polyethylene (PE), polypropylene (PP), crosslinked PE, EPDM, elastomers, nylon, polyurethane (PU), polyacetal and styrenic copolymers.JADEWIN AN 1024 is suitable for use in powder coating applications. This white powder can be used as a primary antioxidant or can be used in combination with hindered phenolic antioxidants (particularly JADEWIN AN 1010) to achieve synergistic performance. Listed in AICS, DSL, IECSC, EINECS, ENCS, ECL, NZIoC, PICCS and TSCA. JADEWIN UV328 by Qingdao Jade New Material Technology is a 2-(2'-hydroxy-3',5'-di-tert-butylphenyl)-5-chlorobenzotriazole. Acts as strong ultraviolet (UV) light absorber (in the 290~400 nm region). Possesses high degree of photo-stability (photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy). Exhibits strong UV absorption, low initial color, good solubility in plasticizers & monomers and moderately low volatility. JADEWIN UV328 is highly compatible with polyolefins, PVC, styrene homo and copolymers, ABS, acrylic polymers, unsaturated polyesters, thermoplastic urethanes, moisture cured polyurethanes, polyacetals, polyvinylbutyral, two component epoxies & urethanes and oil alkyds. Used in thermosetting acrylic enamels and powder coatings. Can be used in combination with phenolic & phosphite antioxidants, and HALS to optimize performance in outdoor use. Listed in AICS, DSL, IECSC, EINECS, ENCS, ECL, PICCS and TSCA.
JADEWIN®
Coating ingredients supplied by Qingdao Jade New Material Technology