Return to supplier page
PETOL® 56-2 LM by Oltchim is poly (propylene oxide) homopolymer (PPG). It is used as a lubricant and defoamer. It is also used as viscosity reducer and flexibleness agent for epoxy resins. PETOL® 56-2 LM is suitable for use in coatings. Polyoxypropylene triol. It is a polyether polyol with 420-average molecular weight. Exhibits low viscosity. Used in the production of coatings. PETOL® 120-2 A by Oltchim is used as a lubricant and defoamer. It is poly (propylene oxide) homopolymer (PPG). It is also used as viscosity reducer and flexibleness agent for epoxy resins. PETOL® 120-2 A is recommended for use in coatings. PETOL® 28-2 LM is poly (propylene oxide) homopolymer (PPG) by Oltchim. It is used as a lubricant and defoamer. It is suitable as viscosity reducer and flexibleness agent for epoxy resins. PETOL® 28-2 LM is used in coatings. Ethylene diamine, propoxylated. It is a polyether polyol obtained by propoxilation of ethylene diamine under catalyst conditions. Has medium functionality 4. Glycerol propoxylated-co-ethoxylated. It is a heteropolymer triol with 3600 nominal molecular weight. This polyether polyol is a clear odorless liquid. Glycerol propoxylated-co-ethoxylated. It is a highly reactive capped triol with 4700 nominal molecular weight. This polyether polyol has a high content of primary hydroxyl groups and is normally used in TDI/MDI or MDI blend formulations. Due to the high content of EO, it is opalescent at temperature below 300°C. Mixture of propoxylated 2, 2', 2''- nitriloethanol and triethanolamine. It is an aminic polyether polyol with high reactivity, obtained by propoxilation of triethanolamine. Used in the production of reticulation agent for rigid sprayed polyurethane foams or in the production of viscosity reducer. 1, 2, 3-Propanetriol methyloxirane polymer. It is a polyoxypropylene triol with 1055 average molecular weight. PETOL® 160-3 is the standard polyol for one-component spray foams. Also used in polyols blends. 1, 2 Propylene glycol-propylene oxide polymer. It is a high purity polyoxypropylene glycol, with a molecular weight of 2000. PETOL® 56-2 is a homopolymer diol and is not acidified. Used in obtaining coating products.
PETOL®
Coating ingredients supplied by Oltchim