Return to supplier page
Bluesil™ BP 9710 by Elkem Silicones is water-based alkylpolysiloxane oligomer emulsion designed to protect surfaces against moisture. Acts as a water repellent. <br>
<ul style="padding-left: 40px;"><li>It is entirely formulated in water-based system. </li>
<li>It is free of any organic solvent, and it does not contain ecotoxic surfactant. </li>
<li>Bluesil™ BP 9710 repels water and allows walls to breathe. </li>
<li>Provides long-lasting limitation of the penetration of rainwater and runoff water in the walls and facades without blocking their breathability (water vapor exchanges). </li>
<li>Also provides very good vapor permeability. </li>
<li>It can be used on many porous mineral materials. </li></ul> BLUESIL™ PI 2074 by Elkem Silicones is a (tolylcumyl) iodonium tetrakis (pentafluorophenyl) borate. Acts as a cationic photoinitiator. It is compatible with epoxy resins, vinyl ethers or any other type of oligomer which polymerizes cationically. It is also suitable to the formulation of hybrid radical/ cationic systems. Recommended dosage level is <1%, combined with a photosensitizer, isopropyl thioxanthone type, for the formulation of inks, pigmented coatings or varnishes applied in thicknesses of greater than 10 microns. BLUESIL™ PI 2074 is used in fiber optics coatings. BLUESIL™ TCS 7534 A/B is a two-component heat curing silicone elastomer dispersion (100 parts BLUESIL™ TCS 7534 A & 10 parts BLUESIL™ TCS Catalyst). It cures by a polyaddition reaction using solvent-less technology. Exhibits high bond strength without primer, fast cure at elevated temperature, low viscosity, low thermal conductivity (high insulation properties) and long bath life at room temperature (more than 16 hours). Provides high tear strength and high comb stripping resistance. Is easily pumpable to sustain high coating speed and allows low coat weight. Suitable for textile coating applications, such as coating of airbag fabrics and technical fabrics for insulation, safety & protection. BLUESIL™ TCS 7534 A/B has a pot life of 16 hours. BLUESIL™ BP 9900 by Elkem Silicones is a non-ionic, APEO free, polyorganosiloxane aqueous emulsion. Acts as an anti-blocking agent and water repellent. Provides good water resistance, water vapor permeability and beading effect. It is designed to enhance water repellency of interior and exterior paints, silicate paints and plasters. Its recommended dosage rate for paint formulations is 1 to 5%. BLUESIL™ BP 9800 by Elkem Silicones is an aqueous APE-free polymethylsiloxane resin emulsion. Combined with acrylic or styrene-acrylic dispersions, BLUESIL™ BP 9800 enables the formulation of coatings with high water vapour permeability, notably below the cPVC. In matt systems with high porosity (PVC > cPVC), BLUESIL™ BP 9800 allows good water repellency and high wet scrub resistance. This emulsion is designed for use in facade coatings, to optimize the balance between water repellency and water vapor permeability. Typically, the recommended ratio is between 10% and 50%, relative to the total binder (calculated dry/dry). BLUESIL™ TCS 7774 A/B by Elkem Silicones is a two-component, heat-curing, liquid silicone elastomer. It is cured by a polyaddition reaction. It offers durability, high elasticity, colorless cure and quick cure with heat. It imparts excellent adhesion to multiple substrates. It is used in technical textile coatings, such as industrial & high-performance fabrics, artificial leather and elastic fabrics. It is also used as a bonding aid for folded seams or other bonded stretch fabrics. BLUESIL™ TCS 7774 A/B has a shelf life of 9 months. BLUESIL™ TCS 7550 A/B is a two-component heat curing liquid silicone elastomer dispersion (50 parts BLUESIL™ TCS 7550 A & 50 parts catalysts - BLUESIL™ 7550 B). It cures by a polyaddition reaction using solvent-less technology. Exhibits high bond strength without primer on coated and uncoated fabrics, fast cure at elevated temperature, low thermal conductivity (high insulation properties) and long bath life at room temperature (more than 16 hours). Provides high tear strength and edge comb resistance. Suitable for industrial and high performance textile coatings. BLUESIL™ TCS 7550 A/B has a pot life of minimum 16 hours. BLUESIL™ RES 6405X by Elkem Silicones is a 50 % solids methylphenylsilicone resin in xylene solution especially developed to resist continuous service temperatures upto 600°C. Provides dry tack free at room temperature and good flexibility. This resin is thus ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. BLUESIL™ TCS 7757 A/B is a two-component heat curing liquid silicone elastomer dispersion (100 parts BLUESIL™ TCS 7757 A & 100 parts BLUESIL™ 7757 B). It cures by a polyaddition reaction using solvent-less technology. Exhibits high bond strength without primer, good abrasion & scuff resistance, fast cure at elevated temperature and long bath life at room temperature (more than 8 hours). Provides high tear strength, smooth surface after curing and edge comb resistance. It is colorless when cured and is fit for high coating weight with relevant process. Suitable for Technical textile coatings, such as industrial and high performance fabrics & artificial leather. It has a pot life of minimum 8 hours. BLUESIL™ ADD 10086 by Elkem Silicones is a polydimethylsiloxane gum in solvent solution. It is especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints and silicone binders. Used in industrial coatings. The doses of use can be varied from 0.1 to 0.8 % according to the type of binder and the effect desired.
Bluesil™
Coating ingredients supplied by Elkem Silicones