Return to supplier page
Dynoadd® P-520 by Dynea is a texture/ scratch resistance agent for water-borne, solvent-borne and radcure coatings. Improves matting/ gloss control and smooth feel. Provides uniform texture. Imparts a permanent slip improvement. Possesses low refractive index, which gives the opportunity of producing textured or matt clear coats without imparting haze to the coating. Dynoadd® P-520 is used in applications like coil coatings, wood coatings and optical coatings. Dynoadd® F-701B by Dynea is a non-silicone, polymeric additive. Particularly effective as anti-foaming, air-release and anti-popping agent. Can be used in solvent-borne and solvent-free coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. It controls surface tension in solvent based coating systems. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel and pinholes. Offers good compatibility with many wax dispersions giving good performance also in highly waxed coating. Recommended for coil, general industrial, packaging and PVdF coatings. Dynoadd® F-701B is completely soluble in solvents like aromatic hydrocarbons and longer chained esters and alcohols. It has a limited solubility in glycols, and is not soluble in water. The recommended dosage rates are 0.0.5-0.2% for coil coatings, 0.1-0.2% for general industrial coatings, 0.05-0.2% for packaging coatings and 0.1-0.2% for PVdF coatings. Dynoadd® F-707 by Dynea is a non-silicone polymer. Acts as a foam control additive. Allows instant release of surface foam. Offers anti-popping and anti-foaming properties. Effectively prevents the generation of foam. Gives no negative influence on the appearance of coatings. Dynoadd® F-707 is used in rad-cure coatings. Polyester-based siloxane modified additive. Acts as a flow, leveling and gloss additive for solvent-borne coatings. Enhances flow / leveling and gloss in clear coats and pigmented systems. Prevents craters and orange peel. Improves substrate wetting and surface slip. Offers very good leveling and overspray cratering resistance to spray applied coatings. Effectively controls surface tension in solvent-borne coatings. Significantly improves film appearance at low dosage levels. Used in wood coatings and automotive OEM repair/refinish. Dynoadd® P-515 by Dynea is a texture / scratch resistance additive for water-borne, solvent-borne and radcure coatings. Improves scratch resistance, matting / gloss control and smooth feel. Provides uniform texture. Dynoadd® P-515 imparts a permanent slip improvement. Possesses low refractive index, which gives the opportunity of producing textured or matt clear coats without imparting haze to the coating. Used in applications like coil coatings, wood coatings and optical coatings. Dynoadd® F-601 by Dynea is non-silicone, acrylic modified polyester. Acts as a wetting and leveling additive for water-borne coatings. Improves substrate wetting. Eliminates craters and pinholes. Offers good flow and levelling. Dynoadd® F-601 is used in wood coatings, industrial coatings and automotive coatings. Dynoadd® F-100 by Dynea is a silicon free polymer that acts as a flow/leveling agent, and wetting agent. Possesses very good flow and leveling. Improves substrate wetting. Eliminates defects like craters, cissing and pinholes. Offers improved compatibility in polar systems. Lowers the surface tension in the formulations. Gives improved performance in more polar solvents. Used in coil coatings, can coatings, automotive(OEM) and printing inks. Approved by FDA under FDA 21§ 175.105. Dynoadd® F-101 by Dynea is a polymeric, silicon free, non-VOC, flow and leveling agent. Offers very good flow and leveling. Improves substrate wetting. Reduces the surface tension in non-solvent and solvent based coating systems. Provides improved compatibility in polar systems. Eliminates surface defects like craters, cissing, and pinholes. Dynoadd® F-101 possesses high polarity which contributes to good pigment wetting and improved adhesion in some systems. Can be used in all layers in multi-layered systems. Used in coil coatings, automotive (OEM), printing inks and radcure coatings. Dynoadd® P-506 by Dynea is a texture / scratch resistance additive for water-borne, solvent-borne and radcure coatings. Improves scratch resistance, matting / gloss control and smooth feel. Provides uniform texture. Imparts a permanent slip improvement. Dynoadd® P-506 possesses low refractive index, which gives the opportunity of producing textured or matt clear coats without imparting haze to the coating. Used in applications like coil coatings, wood coatings and optical coatings. Dynoadd® F-3B by Dynea is a flow and anti-crater additive. Used in can coatings and printing inks. Possesses very good flow / leveling. Improves substrate wetting. Eliminates craters and pinholes.
Dynoadd®
Coating ingredients supplied by Dynea