Supplier Page
Arkema
OverviewProducts901Brands41Products families39News34

SYNAQUA® (Coating ingredients)

Supplied by Arkema
Blendex® modifiers by Galata Chemicals (Artek) are designed to improve the durability, strength, and appearance of many thermoplastic polymers. They are excellent for upgrading recycle, custom compounding of polymers with specific property needs, or altering properties to meet application requirements.

Blendex® modifiers are effective in:

  • Polyvinyl Chloride (PVC)
  • Acrylonitrile Butadiene Styrene (ABS)
  • Polycarbonate (PC)
  • Polyesters (PBT, PET)
  • Thermoplastic Urethane (TPU) & more


14 Products match your search

SYNAQUA® 4804 NA

by Arkema

SYNAQUA® 4804 NA by Arkema is a low VOC, short oil alkyd emulsion. It provides performance similar to solvent-based alkyds. It is APEO-, ammonia-, solvent- and plasticizer-free. It is designed for high performance low yellowing decorative coatings. SYNAQUA® 4804 NA is suitable for floor polish, floor- and architectural coating, including exterior wall, interior wall, primers, specialty coatings, stains and trim.
  • Sustainable option
See the product

SYNAQUA® 821-2241

by Arkema

SYNAQUA® 821-2241 by Arkema is a medium oil, acrylic modified alkyd dispersion. It is based on proprietary technology. Suitable for applications where penetration into porous substrates is critical for durability and moisture resistance. Designed for solvent-borne coating systems. Recommended for low VOC air dry architectural applications. SYNAQUA® 821-2241 can be used for applications on wood and concrete.
See the product

SYNAQUA® 9511

by Arkema

SYNAQUA® 9511 by Arkema is an acrylic polyol emulsion which serves as a binder. When used in 2K or 1K stoving systems, this waterborne binder provides a better balance of performance characteristics and sustainability (low VOC levels) than conventional solvent borne acrylic polyols.<br> <ul style="padding-left: 40px;"><li>It is an alternative for environmentally friendly industrial PU paints and coatings.</li> <li>Suitable for topcoat or monocoat applications and can be applied to a wide range of substrates, including common metal, plastic, glass, wood, and concrete flooring.</li> <li>When properly formulated, coatings made with these binders can assist manufacturers in achieving key performance goals for durability, gloss, adhesion, and chemical resistance.</li> <li>The advantages include excellent weathering and non-yellowing properties, very good hardness development and toughness while remaining flexible.</li><li>Exhibits excellent gloss, very good adhesion to steel, aluminum, ABS, PVC, and PC, as well as fast drying characteristics.</li> <li>SYNAQUA® 9511 has a shelf life of 6 months.</li></ul>
See the product

SYNAQUA® 2070

by Arkema

SYNAQUA® 2070 is a medium oil length alkyd emulsion by Arkema. Offers zero VOC in the finished product and without the short wet-edge time shown by acrylic emulsions. SYNAQUA® 2070 is used in interior undercoats, matt paints, exterior primers for wood, wood stains or metal and corrosion resistant primers.
See the product

SYNAQUA® 811 S 48

by Arkema

Synolac® 811 S 48 is a water-borne acrylic type alkyd emulsion. It contains alcohol/water as the volatile component. Helps in eliminating cissing and other defects. Suitable for water soluble one component (1K) coatings, one component (1K) stoving paints and topcoats. Applications include can coatings.
See the product

SYNAQUA® 3510 SW 80

by Arkema

Synolac® 3510 SW 80 is a water-borne modified OFPE type alkyd emulsion. It contains propylene glycol dimethyl ether (PGDME) as the volatile component. Exhibits good chemical- & corrosion resistance and offers high gloss. Suitable for one component (1K) coatings, one component (1K) stoving paints, primers and two component (2K) polyurethane (PU) topcoats. Market applications include architectural & construction equipment (ACE), commercial vehicles, general metal and protective marine coatings.
See the product

SYNAQUA® 6812

by Arkema

SYNAQUA® 6812 by Arkema is a self-emusifiable alkyd used as a grinding medium. It is also a co-binder for wall primers with improved adhesion on porous substrates (gypsum, plasterboards). SYNAQUA® 6812 is used in water-based decorative coatings.
See the product

SYNAQUA® 2350 EP 60

by Arkema

SYNAQUA® 2350 EP 60 is a highly flexible carboxylated epoxy-acrylic copolymer by Arkema. Used for dip and curtain coating. Offers fast drying, good gloss and very good pigment wetting. SYNAQUA® 2350 EP 60 provides good chemical & water resistance and good direct to metal adherence when used in solvent- and water-based applications.
See the product

SYNAQUA® AD 821-1674

by Arkema

Short oil length epoxy ester dispersion. Used in architectural, direct to metal primers, one coat interior metal enamels, automotive under the hood enamels and light industrial maintenance coatings.
See the product

SYNAQUA® AD 821-1391

by Arkema

Short oil chain stopped acrylic modified alkyd dispersion. Used in architectural, porch and deck stains and industrial topcoats. Possesses fast dry and high gloss. Offers early water resistance. Imparts very good adhesion to wood, plastic and metal substrates. Exhibits very good wet adhesion to wood.
See the product
Showper page

Most Popular Brands

REAFREE®

by Arkema

144 products
See All Products

CHEMPOL®

by Arkema

123 products
See All Products

Synolac®

by Arkema

110 products
See All Products

Encor®

by Arkema

84 products
See All Products