Encor® (Coating ingredients)
Supplied by Arkema
84 Products match your search
Encor® 7325
by Arkema
Encor® 5650
by Arkema
- Sustainable option
Encor® 7325 by Arkema is a styrene acrylic copolymer emulsion. It is designed for use in interior and exterior concrete sealer applications. It exhibits
outstanding water resistance and excellent sealing characteristics. It can be formulated to meet ASTM C-309 and C-1315 requirements. Encor® 7325 is suitable for coatings and inks, DIY floor polishes and floor coatings, as well as industrial wood finish applications.
Encor® 5650 by Arkema is an all-acrylic, self-crosslinking, nanoparticle size latex designed for clear and pigmented concrete coatings. It provides adhesion over cement and quarry tile substrates, blush resistance over a variety of substrates, flexibility and durability for exterior applications. <br>
<ul style="padding-left: 40px;"><li>It also offers excellent QUV stability, resistance to automotive and household chemicals, and resistance to hot tire pickup.</li>
<li>It is produced without APEO, benzophenone, formaldehyde, or PFAS and is capable of low VOC formulations.</li>
<li>Encor® 5650 meets EnVia® standards.</li></ul>
Encor® 2461 by Arkema is a styrene acrylic copolymer emulsion. It is a cost-effective binder for architectural coatings, including elastomeric wall and exterior wall applications.
Encor® 3560 by Arkema is a high-solids binder designed for patch and repair applications, as well as tape joint compounds. Suitable for architectural coatings, including interior wall applications.
Encor® Flex 2462 by Arkema is a styrene-acrylic emulsion. It is a cost-effective binder for architectural coatings, including elastomeric wall and exterior wall applications. Encor® Flex 2462 enhances dirt pick up resistance that is formulated without alkyphenolethoxylates
Acrylic Polymer. It shows excellent dirt pickup resistance, passes wind driven rain test, UV initiated crosslinking for enhanced dirt pick-up resistance. It is designed for elastomeric roof and wall coatings. With its inherent dirt pickup resistance, it meets the requirements of the “Leadership in Energy and Environmental Design (LEED) Green Building Rating System” and the U.S. Environmental Protection Agency/ Department of Energy’s “Energy Star” program. If Properly formulated it also meets the requirements of ASTM D-6083 (“Standard Specification for Liquid Applied Acrylic Coating used in Roofing”) and the “Cool Roof Rating Council’s (CRRC)” product rating program for reflectance and emittance at VOC levels less than 50 grams per liter.
Encor® 282 by Arkema is a high-performance general purpose vinyl acetate/ethylene binder for architectural coatings. It has no added Alkylphenol Ethoxylate (APE) surfactants and formaldehyde. This product offers exceptionally high scrub resistance and excellent film formation. This polymer enhances touch-up properties, enables broad formulation latitude and has superior touch-up properties.
Styrene-acrylic latex. It exhibits cost-effectiveness, weatherability, elongation, low-VOC, UV initiated crosslinking for excellent dirt pickup resistance and compatibility to cement. Provides resistance to water and causticity. Intended to be used in roof systems that meet the “Cool Roof Rating Council’s (CRRC)” product rating program requirements for reflectance and emittance at VOC levels less than 50 grams per liter. Applications include elastomeric roof and wall coatings.
High solids styrene-acrylic polymer. Combines high adhesion with unusually high resistance to water and alkali. It has an excellent mechanical shear stability and excellent adhesion to a variety of architectural substrates like wood, low- and medium- density urethane foam, aluminium, and concrete. The polymer’s high alkali resistance allows its use over “green” cement or block fillers. Coatings attain water resistance quickly after application and will achieve and maintain desirable properties under extreme drying conditions. It is primarily used in elastomeric weather-barrier coatings.
Encor® 8002 by Arkema is a high efficiency transfer additive for water-based flexographic inks. It will increase the transfer and color strength of water-based flexographic inks when used around 1%.