Return to supplier page
VANCRYL® 965 by allnex is a very low Tg acrylic polymer for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. VANCRYL® 965 is used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.45. VANCRYL® 960 by allnex is a very low Tg acrylic polymer for film printing applications in the graphic arts industry. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters and waxes. VANCRYL® 960 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.45. VANCRYL® 68 by allnex is a solid acrylic resin providing outstanding pigment wetting along with the viscosity stability needed for aqueous gravure and flexographic inks. The transfer properties and hold-out characteristics of inks prepared with VANCRYL® 68 resin are excellent. It is effective as a protective colloid in the production of styrene-acrylic copolymer emulsions. VANCRYL® 450 by allnex is a high solids colloidal dispersion that can be neutralized with ammonia or other alkaline materials to provide an outstanding vehicle for corrugated printing ink applications. VANCRYL® 450 at 40% solids reduces the cost in ink systems based on pre-neutralized colloidal acrylics. VANCRYL® 926 by allnex is a very low Tg acrylic polymer for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance and fine printing characteristics. These properties are needed when converting packaging printing from solvent-based formulations to water-based formulations. VANCRYL® 68-S by allnex is an aqueous solution of VANCRYL® 68 acrylic resin, in ammonia. Outstanding pigment wetting along with the viscosity stability needed for aqueous gravure and flexographic inks. VANCRYL® 927 by allnex is a medium Tg acrylic emulsion for the graphic arts industry. Excellent gloss can be obtained by utilizing VANCRYL® 927 in inks and coatings. Its film formation properties coupled with its rapid water release result in very fast drying. It is suitable for both flexographic and gravure printing on paper substrates. VANCRYL® 989 by allnex is a high Tg acrylic emulsion for the graphic arts industry. Excellent gloss and fast drying rates can be obtained by utilizing VANCRYL® 989 in inks and coatings. It is suitable for both flexographic and gravure printing on paper substrates. VANCRYL® 800 by allnex is a styrene/acrylic copolymer used in waterborne inks and coatings for graphic arts applications. It provides pigment wetting along with the viscosity stability needed for aqueous gravure and flexographic inks. The transfer properties and hold-out characteristics of inks prepared with VANCRYL® 800 are excellent.
VANCRYL®
Coating ingredients supplied by allnex
9 Products match your search
VANCRYL® 965
by allnex
- Support available
- Original documents
VANCRYL® 960
by allnex
- Support available
- Original documents
VANCRYL® 68
by allnex
- Support available
- Original documents
VANCRYL® 450
by allnex
- Support available
- Original documents
VANCRYL® 926
by allnex
- Support available
- Original documents
VANCRYL® 68-S
by allnex
- Support available
- Original documents
VANCRYL® 927
by allnex
- Support available
- Original documents
VANCRYL® 989
by allnex
- Support available
- Original documents
VANCRYL® 800
by allnex
- Support available
- Original documents
Showper page

