Supplier Page
Advanced Polymer
OverviewProducts51Brands14Products families24

APFS (Coating ingredients)

Supplied by Advanced Polymer

6 Products match your search

APFS 75S

by Advanced Polymer

Anionic fluorosurfactant. APFS-75S acts as an anti-block additive, wetting, flow and leveling agent. It exhibits low aqueous surface tension, eliminates many surface defects and reduces foam. It is VOC and APEO free. Provides excellent substrate wetting, levelling and flow control. Possesses oil repellency and dirt pick up resistance. Used in wide variety of applications including latex paints and coatings, urethane based coatings, architectural coatings, floor finishes, industrial finishes and wood coatings.
See the product

APFS- 74S

by Advanced Polymer

APFS- 74S by Advanced Polymer is a VOC and APEO free fluorophosphate ester. Acts as a wetting, flow, levelling and anti-blocking agent. Exhibits very low surface tension in aqueous solutions. Provides oil repellence and dirt pick up resistance. It is a water reducible, short-chain fluorosurfactant based on non-C8 chemistry. It reduces cratering and offers faster spreading. Applications include floor care finish waxes & polishes, wood coatings, architectural coatings and industrial finish. Its ingredients are listed in TSCA list of chemical substances. APFS- 74S complies with DSL and REACH regulations.
See the product

APFS 27-40

by Advanced Polymer

Fluorinated surfactant. It acts as a wetting- and levelling agent. It exhibits stability, effectiveness in hard water, better wetting, spreading, and penetration. It is very effective on hard to wet surfaces such as plastics, oily or waxy substrates, and fluoropolymer or silicone treated fabrics. It reduces the surface tension of aqueous solutions and emulsions to as low as 20 dynes/cm. Possesses stability in concentrated acids, bases and oxidizing solutions. Low use levels required (0.01-0.1%). Provides far greater surface tension reduction that can be achieved with either hydrocarbon or silicone based surfactants. Used in waterborne applications. In coatings, it improves film uniformity, enhances adhesion, and reduces pinholes and craters. In finishes and polishes, it reduces droplet resulting in less spotting, and smoother and more even films. Also used in floor polishes/ strippers and paints. Complies with TSCA (USA).
See the product

APFS 71S

by Advanced Polymer

Non-ionic fluorosurfactant. APFS-71S acts as a wetting agent. It exhibits stability, effectiveness in hard water, better spreading, and penetration. It is VOC free and is very effective on hard to wet surfaces such as plastics, oily or waxy substrates, and fluoropolymer or silicone treated fabrics. Possesses stability in concentrated acids, bases and oxidizing solutions. Provides great surface tension reduction. In coatings, it improves film uniformity, enhances adhesion, reduces pinholes and craters. In finishes and polishes, it reduces droplet resulting in less spotting, and smoother and more even films. Also used in floor polishes and paints. Complies with TSCA (USA).
See the product

APFS 76S

by Advanced Polymer

Perfluoroalkylacrylate emulsion. APFS-76S acts as a wetting, flow and leveling agent. It exhibits excellent clean-ability and oil repellency when added to flat finish architectural paints and water based coatings. Possesses dirt pick up resistance. It is based on short-chain fluorochemical technology. Increases cleanability of flat architectural paints and water based coatings. Works in a wide variety of latex systems. Does not interfere with re-coat adhesion. Coatings can be spray applied at recommended levels. Used in wood coatings, latex paints and coatings.
See the product

APFS 70S

by Advanced Polymer

APFS 70S by Advanced Polymer is non-ionic fluorosurfactant. APFS 70S acts as a wetting and levelling agent. It exhibits stability, effectiveness in hard water, better spreading, and penetration. It is VOC free and is very effective on hard to wet surfaces such as plastics, oily or waxy substrates, and fluoropolymer or silicone treated fabrics. It reduces the surface tension of aqueous solutions and emulsions to as low as 20 dynes/cm. Possesses stability in concentrated acids, bases and oxidizing solutions. Low use loading level required (0.01-1%). Provides far greater surface tension reduction that can be achieved with either hydrocarbon or silicone-based surfactants. Used in waterborne applications. In coatings, it improves film uniformity, enhances adhesion, and reduces pinholes and craters. In finishes and polishes, it reduces droplet resulting in less spotting, and smoother and more even films. APFS 70Salso used in floor polishes and paints. Complies with TSCA (USA).
See the product
Showper page

Most Popular Brands

AP-Silane

by Advanced Polymer

19 products
See All Products

API

by Advanced Polymer

6 products
See All Products

APFS

by Advanced Polymer

5 products
See All Products

APS

by Advanced Polymer

4 products
See All Products