Binders for Coatings and Inks
24450 products found
DEGALAN® LP 64/12
by DKSH
DEGALAN® LP 64/12 distributed by DKSH is a versatile binder methacrylates. It exhibits weather- and chemical resistance and lightfastness.
- It is used in UV-printing inks, aerosol, marine & container coatings, primers, impregnations, exterior house-, masonry- and road marking paints. It is blendable with alcohol and possesses good adhesion to various substrates such as plastics, paper, textiles and metal.
- It is also designed for penetrating primers, concrete- and protective coatings.
- It is compatible with most PVC copolymers, PS, PC, PMMA, ABS, ester-soluble nitrocellulose, chlorinated rubber, plasticizer, cellulose acetobutyrates/ acetopropionate and partly compatible with alkyd and epoxy ester resins.
- It has a shelf life of 5 years.
- DEGALAN® LP 64/12 is available in Canada.
- Support available
- Original documents
EBECRYL® 436
by allnex
EBECRYL® 436 by allnex is a reactive chlorinated polyester resin diluted 40% with the reactive diluent trimethylolpropane triacrylate (TMPTA). It exhibits good lithographic behavior, pigment wetting properties and fast cure response in ultraviolet light (UV) curable coatings and inks. Cured films of EBECRYL® 436 display good adhesion to metals, plastics and paper. It is recommended for wet lithographic inks for paper, plastics and metals, overprint varnishes and post-formable inks.
- Support available
- Original documents
DEGALAN® 64/12 N
by DKSH
DEGALAN® 64/12 N distributed by DKSH is a granulated polymer based on methacrylates. It is versatile binder for concrete- and thick-layer metal coatings. It exhibits weather- and chemical resistance and lightfastness.
- It is used in marine & container coatings, primers, impregnations, exterior house- and road marking paints and plastic coatings.
- It is compatible with most PVC copolymers, nitrocellulose, chlorinated rubber, plasticizer, cellulose acetobutyrates/acetopropionate and partly compatible with alkyd and epoxy ester resins.
- DEGALAN® 64/12 N has a shelf life of 5 years and is available in Indonesia, Philippines, Vietnam, Belgium, Netherlands and Luxembourg.
- Support available
- Original documents
Parmetol® A 26 N
by DKSH
Parmetol® A 26 N distributed by DKSH acts as a preservative. It is a stabilized aqueous preparation based on chloromethyl-/methylisothiazolone (CMI/MI) and reaction product of ethylene glycol, urea and paraform. It has characteristic odor and contains only biodegradable components. It is suitable for a broad range of water-based formulations.
- It offers a broad and balanced spectrum of effects against bacteria, yeast and mold.
- It is suitable for use in textured coatings and plasters.
- The recommended dosage level is 0.10-0.20% and pH range is 3-9.5.
- Parmetol® A 26 N has a shelf life of 36 months and is available in Australia, New Zealand, Philippines, Spain and Thailand.
- Sustainable option
- Support available
- Original documents
SETALUX® XCS 1516 TS-45
by allnex
SETALUX® XCS 1516 TS-45 by allnex is a CPO modified acrylic polyol with 0.8% hydroxyl content (calculated on non-volatiles). It shows excellent adhesion on PP substrates, excellent water resistance and very good stability at low temperature. SETALUX® XCS 1516 TS-45 can be utilized in primers or metallic monocoats (1K and 2K).
- Support available
- Original documents
VISCOPOL™ 6191
by allnex
VISCOPOL™ 6191 by allnex is a low-foaming, fast-drying and anionic styrene acrylic copolymer emulsion. It exhibits excellent water and grease-resistance, excellent gloss and adhesion properties and has excellent mechanical shear stability. It also shows excellent pigment wetting and good block resistance coupled with wide solvent tolerance. VISCOPOL™ 6191 is particularly recommended for use in water-based flexographic & gravure printing inks, overprint lacquers and paper & board-coating applications. It is also highly recommended for use in the formulation of anti-corrosive metal primers. It has a shelf life of 12 months.
- Support available
- Original documents
Parmetol® DF 35 N
by DKSH
Parmetol® DF 35 N distributed by DKSH acts as a preservative. It is a stabilized aqueous preparation based on chloromethyl-/methylisothiazolone (CMI/MI) and reaction product of ethylene glycol, urea and paraform. It is recommended for the preservation of a broad range of water-based formulations.
- It offers a broad, balanced spectrum of effects against bacteria, yeast and mold.
- It has an aldehyde-like odor and contains only biodegradable components.
- It is used in dispersion paints, textured coatings and plasters.
- The recommended dosage level is 0.10-0.20% and pH range is 3-10.
- Parmetol® DF 35 N has a shelf life of 24 months and is available in Australia, New Zealand, Philippines and Thailand.
- Sustainable option
- Support available
- Original documents
CRYLCOAT® 4823-0
by allnex
CRYLCOAT® 4823-0 by allnex is a saturated, super-durable, hydroxyl functional polyester resin. Coatings based on this product exhibit good flow, mechanical, chemical and weathering resistance. It is used with block polyisocyanates or uretdiones in the production of powder coatings. The shelf life of CRYLCOAT® 4823-0 is 24 months.
- Support available
- Original documents
Lacper® 4507
by Wanhua Chemical
Lacper® 4507 by Wanhua Chemical is a self-crosslinking acrylic copolymer emulsion. It shows high transparancy, excellent in-can and dry-film clarity because of its small particle size.
- It exhibits good film hardness, fast drying speed, good sandability and excellent chemical resistance.
- It has good adhesion to a variety of substrates such as wood, plastics such as ABS, PC and PVC.
- Lacper® 4507 contains no APEO, formaldehyde and its derivative.
- This waterborne resin is recommended for interior, exterior, primer sealer, midcoat, basecoat, clearcoat, topcoat, wood and plastic applications.
- Support available
- Original documents
