Imide Monomers for Coatings and Inks

Amorphous, low molecular weight, imide-extended bismaleimide oligomer. Exhibits excellent low pH hydrolytic resistance and thermal stability. It can be homo-cured via UV or free radical initiators to form tough, hydrophobic, cross-linked polyimides. Forms room-temperature-stable solutions in a variety of free radical reactive diluents. It is soluble in many common solvents such as toluene, xylene, NMP, etc. Listed in TSCA.

Homide 123 by HOS-Technik is N,N’-(4-methyl-m-phenylene)-bismaleimide. It is bismaleimide supplied in powder form with different particle sizes. It is offered either coated or non-coated. Homide 123 is used as co-monomer for high-temperature resin systems and inks & coatings.

Homide 125 by HOS-Technik is N,N’-m-phenylenebismaleimide. This short-chain homide is a bismaleimide derivative that can be polymerized by heat or catalysts. In addition shows increase in the thermal stability of the copolymers produced and improves the surface and UV stability. Homide 125 used in inks and coatings.

Homide 122 by HOS-Technik is polyphenylmethanebismaleimide. It is bismaleimide supplied in powder form with different particle sizes. It is offered either coated or non-coated. Homide 122 is used as co-monomer for high-temperature resin systems and inks & coatings.

Homide 250 by HOS-Technik is bismaleimide. It is a high temperature resin and a high-performance duroplast with thermally curable groups. After thermal curing, it shows excellent thermo-oxidative and mechanical properties. Homide 250 applications include inks and coatings.

Homide 400 by HOS-Technik is monomaleimide. This short-chain homide is a monomaleimide derivative that can be polymerized by heat or catalysts. In addition shows increase in the thermal stability of the copolymers produced and Homide 400 improves the surface and UV stability. Used in inks and coatings.

Homide 108 by HOS-Technik is 2.6-Xylylmaleimide. This short-chain homide is a monomaleimide derivative that can be polymerized by heat or catalysts. In addition shows increase in the thermal stability of the copolymers produced and improves the surface and UV stability. Homide 108 used in inks and coatings.

Homide 121 by HOS-Technik is 4,4’-Diphenylmethanebismaleimide. It is bismaleimide supplied in powder form with different particle sizes. It is offered either coated or non-coated. Homide 121 is used as co-monomer for high-temperature resin systems and inks & coatings.

Celazole® PBI S26 Solution by PBI Performance Products is a solution containing polybenzimidazole (PBI) polymer dissolved in dimethylacetamide (DMAc) in the presence of a lithium chloride stabilizer. It is easily thinned and can be used for membranes and films. It provides corrosion protection, electrical insulation, wear resistance and anti-galling properties.

• It shows adhesion to steel, stainless steel, aluminum, copper, nickel, chromium, glass, ceramics and plastics.
• It offers high resistance to heat and chemical attack.
• Free standing films and microporous coatings are recommended for filtrations, gas separations, forward and reverse osmosis.
• Celazole® PBI S26 Solution is suitable for dip- and spray coatings.

Celazole® PBI S15 Solution by PBI Performance Products is a solution containing polybenzimidazole (PBI) solids in dimethylacetamide (DMAc). It possesses high glass transition temperature and low coefficient of thermal expansion. It can be firmly adhered to steel, stainless steel, aluminum, copper, nickel, chromium, glass, ceramics and plastics.

• It offers a low friction surface for protection from mechanical abrasion, thermal- and electrical insulation, and protection from chemical attack for a wide range of substrates.
• Celazole® PBI S15 Solution is recommended for film casting and thin conformal coatings.