Return to supplier page
AXCIDE DCOIT-30 by Planet Chemicals acts as a biocide as well as dry-film mildew protector. It easily incorporates into water-based or solvent-based formulations. Offers good stability with ionic surfactants and emulsifiers. AXCIDE DCOIT-30 ideal usage level is between 0.3-1.0% based on the wet formulation weight. AXCIDE LA 1209 by Planet Chemicals is a combination of 5-chloro-2-methyl-4-isothiazolin-3-one (CIT), 2-methyl-4-isothiazolin-3-one (MIT) and mixture of bronopol. Acts as an excellent liquid biocide. It is specially formulated for wet preservation of magnesium and copper ion-sensitive water based system. AXCIDE LA 1209 is formulated with sodium salt stabilizer and never contains with volatile organic chemicals (VOC). Offers a broad-spectrum activity in inhibiting bacteria, molds and yeasts. Used in glues. The ideal chemical dosage is 0.05-0.40% of total amount to be preserved and it also depends on susceptibility to micro-organisms as well as storage condition. AXCIDE OPP-TG by Planet Chemicals is a 2-phenylphenol grade. It is a low-toxicity, water insoluble, biocide for protection against microorganisms in wet state. AXCIDE OPP-TG is suitable for use in adhesives. This grade is soluble in glycols and alcohols. Aqueous formulation of 2-methyl-4-isothiazolin-3-one (MIT) and 1, 2 benzisothiazolin-3-one (BIT). Acts as a liquid biocide. It controls the growth of bacteria, fungi, yeast and molds. It can inhibit a wide range of micro-organisms for example bacteria such as achromobacter sp, aeromonas sp, alcaligenes sp, bacillius sp, escherichia coli, flavobacterium sp, klebsiella sp, proteus sp, pseudomonas sp, streptomyces sp and molds such as aspergillums sp, cephalosporium sp, cladosporium sp, fusarium sp, saccharomyces cerevisiae. Offers a broad spectrum activity, good long-term thermal and pH stability with significantly reduced sensitivity. Used in glues. Its chemical dosage is 0.1-0.4% of total amount to be preserved and it depends on product preserved as well as environment of exposure. 4, 5-Dichloro-2-n-octyl-isothiazolin-3-one. Acts as a biocide as well as dry-film mildew protector. It easily incorporates into water-based or solvent-based formulations. Offers good stability with ionic surfactants and emulsifiers. Its ideal usage level is between 0.3-1.0 % based on the wet formulation weight. AXCIDE BIT-33 is a 1,2-benzisothiazolin-3-one grade by Planet Chemicals. This grade is a low-toxicity biocide prepared in glycol solution for protection against microorganisms in wet state. It has a good thermal stability and low volatility. AXCIDE BIT-33 is suitable for use in adhesives. This grade can be easily formulated into many products as it is miscible with water in any ratio. It is stable over a wide pH range of 2 - 12. This grade can be added at a very early phase in the production process without affecting the active content during the higher temperature processes. Methylene bis (thiocyanate). Acts as a preservative. It is stable under normal conditions, but darkens with rising temperature. Used for the preservation of adhesives. 4, 5-Dichloro-2-n-octyl-isothiazolin-3-one. Acts as a biocide. It easily incorporates into water-based or solvent-based formulations. Offers good stability with ionic surfactants and emulsifiers. Used primarily as a raw material to make a fungicide for adhesives. Its ideal usage level is between 0.1-0.5% based on the active. AXCIDE BIT-20 by Planet Chemicals is a 1,2-benzisothiazolin-3-one grade. This grade is a low-toxicity biocide prepared in propylene glycol/glycerine solution for protection against microorganisms in wet state. AXCIDE BIT-20 is suitable for use in adhesives. It is stable over a wide pH range of 4 - 12. It can be easily formulated into many products as it is miscible with water in any ratio. It has a good thermal stability and low volatility. It can be added at a very early phase in the production process without affecting the active content during the higher temperature processes. Zinc pyrithione or bis (2-pyridylthio) zinc 1, 1’-dioxide. Acts as a low toxicity biocide liquid as well as anti-fouling agent. It shows good stability as bactericide and fungicide in the pH range from 4 to 10. It is friendly to environment and effectively inhibits the growth of pathogenic micro-organisms such as streptococcus, staphylococcus, fungi, yeast, mold as well as bacterial.
AXCIDE
Adhesive ingredients supplied by Planet Chemicals