Supplier Page
Carpenter
OverviewProducts41Brands1Products families3

CARPOL® (Adhesive ingredients)

Supplied by Carpenter
CARPOL® by Carpenter is a range of polyether and polyester polyols used in polyurethane adhesive formulations. The portfolio includes diols, triols, amine polyols, aromatic polyester polyols, sucrose polyols and Mannich polyols, providing a broad selection of functionalities, initiators and molecular weights to meet diverse formulation requirements for coatings, adhesives, sealants and elastomers (C.A.S.E.).

Key benefits of CARPOL® brand include:

  • Broad portfolio of polyether and polyester polyols
  • Wide range of functionalities, initiators and molecular weights
  • Suitable for coatings, adhesives, sealants and elastomers (C.A.S.E.)
  • Supports diverse polyurethane formulation requirements
  • Available with renewable-content options on selected grades

41 Products match your search

CARPOL® PGP-400

by Carpenter

CARPOL® PGP-400 by Carpenter is a propylene glycol initiated polyether polyol. It possesses a nominal functionality of two and a molecular weight of 400. The low functionality and viscosity, makes for a versatile product. CARPOL® PGP-400 is polymerized solely with propylene oxide for controlled reactivity and also be utilized in a number of C.A.S.E. applications and in caulks & sealants.
See the product

CARPOL® PGP-3815

by Carpenter

CARPOL® PGP-3815 by Carpenter is a propylene glycol initiated polyether polyol. It has a functionality of two and an average molecular weight of 3800. It is a copolymer of propylene oxide and ethylene oxide and the main applications include C.A.S.E., however, CARPOL® PGP-3815 may also be included as a component in other urethane products, caulks, sealants and formulations.
See the product

CARPOL® SP-477

by Carpenter

Sucrose initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of five. Blending this polyol with other polyether polyols provides foam systems with high to low degrees of crosslinking. It is a neutral material, which presents the formulator with complete catalytic control over a system. Recommended for rigid foam and its applications.
See the product

CARPOL® GSP-520

by Carpenter

Glycerin/sucrose initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of five. Blending this polyol with other polyether polyols provides foam systems with high to low degrees of crosslinking. Recommended for molded rigid foam and rigid boardstock foam.
See the product

CARPOL® GSP-370

by Carpenter

Glycerin/sucrose initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of seven. Blending this polyol with other polyether polyols provides foam systems with high to low degrees of cross-linking. It is mildly catalytic, which enables the use of less catalyst while still providing the formulator with control over the system’s reactivity. Recommended for rigid foam and its applications.
See the product

CARPOL® GSP-355

by Carpenter

Glycerin/sucrose initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of 4.5. It is a neutral material, which presents the formulator with complete catalytic control over a system. Blending this polyol with other polyether polyols provides foam systems with high to low degrees of cross-linking. Due to this polyol’s high functional nature, it is typically used in rigid foam and its applications. Recommended for molded rigid foam and rigid boardstock foam.
See the product

CARPOL® PGP-2050

by Carpenter

CARPOL® PGP-2050 by Carpenter is a propylene glycol-initiated polyether polyol. It has a functionality of two and an average molecular weight of 2000. It is polymerized with propylene oxide and then capped with 50% ethylene oxide. The outcome is a polyol with enhanced reactivity. CARPOL® PGP-2050 main applications include C.A.S.E.; however, it may also be included as a component in other urethane products, caulks, sealants and formulations.
See the product

CARPOL® PGP-4025

by Carpenter

CARPOL® PGP-4025 by Carpenter is propylene glycol initiated polyether polyol. It has a functionality of two and an average molecular weight of 4000. It is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity. CARPOL® PGP-4025 main applications include C.A.S.E.; however, may also be included as a component in other urethane products, caulks, sealants and formulations.
See the product

CARPOL® GSP-280

by Carpenter

Glycerin/sucrose initiated polyether polyol. It is of high functionality. Blending this polyol with other polyether polyols provides foam systems with high to low degrees of crosslinking. It is mildly catalytic, which enables the use of less catalyst while still providing the formulator with control over the system’s reactivity. Recommended for rigid foam and its applications.
See the product

CARPOL® PGP-3000

by Carpenter

CARPOL® PGP-3000 by Carpenter is a propylene glycol initiated polyether polyol. It has a functionality of two and an average molecular weight of 3000. It is polymerized solely with propylene oxide for controlled reactivity and the main applications include C.A.S.E., however, CARPOL® PGP-3000 may also be included as a component in other urethane products, caulks, sealants and formulations.
See the product
Showper page

Most Popular Brands

CARPOL®

by Carpenter

41 products
See All Products