Fillers / Extenders for Adhesives and Sealants
1430 products found
Socal® 312
by Imerys
Socal® 312 by Imerys is an ultrafine, coated, surface treated precipitated calcium carbonate. It acts as a reinforcing agent & flow aid.
- It gives excellent control over rheological properties such as yield value, viscosity and anti-slump behavior.
- It confers the right balance of extrusion rate and mechanical properties.
- It provides short dispersion times at high loading levels.
- Socal® 312 improves processing properties and offers enhanced tensile strength, storage stability, multi-substrate adhesion and stone chipping resistance.
- It can improve physical properties and limit compaction problems of powders.
- It is recommended for plastisols, caulks, adhesives and automotive application.
- It is suitable for 1- and 2-component silicone sealant formulations.
Socal® U1S2
by Imerys
Socal® U1S2 by Imerys is an ultrafine, white and odorless coated precipitated calcium carbonate grade. It possesses a very high fineness, roundeal regular crystals and an organic surface treatment. It is used in sealants and adhesives based on polysulfide, polyurethane and silicon. Socal® U1S2 provides rheological control and good slump resistance.
Socal® 31
by Imerys
Socal® 31 by Imerys is an ultrafine, precipitated calcium carbonate. It acts as a reinforcing agent.
- It gives excellent control over rheological properties such as yield value, viscosity and anti-slump behavior.
- Socal® 31 offers enhanced multi-substrate adhesion and stone chipping resistance.
- It contributes to improved physical properties.
- It is recommended for plastisols, sealants, caulks & adhesives that are used in automotive applications.
- It is suitable for water-based formulations.
Winnofil® SPM
by Imerys
Winnofil® SPM by Imerys is an ultrafine, surface treated precipitated calcium carbonate. It acts as a reinforcing agent.
- It is a very fine, white and odorless powder with a unique crystal size and shape.
- It gives excellent rheological properties like anti-slump behavior and good control over yield value and viscosity.
- Winnofil® SPM contributes to improved physical properties.
- It is recommended for plastisols, caulks & mastics, elastomers, and sealants & adhesives.
Socal® 322
by Imerys
Socal® 322 by Imerys is an ultrafine, precipitated calcium carbonate. It acts as a reinforcing agent.
- It gives excellent control of rheological properties like yield value, viscosity and anti-slump behavior.
- It contributes to improved physical properties.
- It is used in a variety of adhesives, caulks and plastisols.
- Socal® 322 is recommended for 1- and 2-component silicone sealant formulations.
Omyabond 120
by Omya
Omyabond 120 by Omya is a low-moisture, ultrafine, natural calcium carbonate filler designed for reactive adhesives and sealants. It is a treated mineral with a high surface area. It can be used as a single component to provide a typical rheological modifier profile combined with true reinforcing properties without compromising on moisture content and moisture pick-up. Shows sag resistance, good extrusion rate, good adhesion, higher strength, elongation, good mechanical
performance, elastic recovery, and good workability. Provides low energy intensity and easy-to-disperse, cost-effective grade with low polymer content. Omyabond 120 allows moisture scavenging, process savings to avoid pre-drying and higher machine productivity. It is recommended for use in SMP (Silyl Modified Polymer) systems. It enables formulation of sealants that meet the relevant ISO standards while reducing polymer content and without impacting processing.
Omyabond 420
by Omya
Omyabond 420 by Omya is an ultrafine, ground calcium carbonate (GCC) filler. It exhibits excellent bond strength and mechanical properties. It offers improved storage stability, workability and ridge holding along with best cost/performance ratio. Due to its smaller particle size, Omyabond 420 provides shear thinning and excellent adhesion on wood. It is designed for moisture curing parquet adhesives such as silyl modified polymers (SMP), hybrid, silicone and polyurethanes. It does not influence viscosity upon accelerated storage, even without pre-drying the formulation.
Winnofil® SPT
by Imerys
Winnofil® SPT by Imerys is an ultrafine, surface treated precipitated calcium carbonate. It acts as a reinforcing agent.
- It gives excellent control of rheological properties like yield value, viscosity and anti-slump behavior.
- It contributes to improved physical properties.
- Winnofil® SPT is used in a variety of different sealants, caulks and plastisols applications.
- It is suitable for bonding applications such as structural adhesives.
Nyad® M200
by Imerys
Nyad® M200 by Imerys is a high-purity, wollastonite grade. It acts as an anti-mud cracking agent.
- It offers improved loss factor and superior performance in damping.
- It is recommended for plastisols, water-based adhesives, & sealants that are used in automotive applications.
- Nyad® M200 is suitable for caulks & downgauging of core paper-weight in adhesives.
