Return to supplier page
AEROPOR® 1000 by sh minerals is an alumino silicate. Acts as a filler. It stands out due to its low water requirement and its natural color. Exhibits low real density (range of 0.6-0.7 g/cm<sup>3</sup>), is pressure-resistant, free-flowing, inert, frost-, temperature-, heat-, shock-,chemical-resistant, neutral in odor, environment-friendly, incombustible and dimensionally stable. AEROPOR® 1000 is suitable for use in products made of polyester-, epoxid-, phenolic resin and polyurethane, light-SMC and -BMC, glass fiber (GRP), under-seal and PVC-plastisols. AEROPOR® 300 by sh minerals is an alumino silicate. Acts as a filler. It stands out due to its low water requirement and its natural color. Exhibits low real density (range of 0.6-0.7 g/cm<sup>3</sup>), is pressure-resistant, free-flowing, inert, frost-, temperature-, heat-, shock-,chemical-resistant, neutral in odor, environment-friendly, incombustible and dimensionally stable. AEROPOR® 300 is suitable for use in products made of polyester-, epoxid-, phenolic resin and polyurethane, light-SMC and -BMC, glass fiber (GRP), under-seal and PVC-plastisols. AEROPOR® 500 by sh minerals is an alumino silicate. Acts as a filler. It stands out due to its low water requirement and its natural color. Exhibits low real density (range of 0.6-0.7 g/cm<sup>3</sup>), is pressure-resistant, free-flowing, inert, frost-, temperature-, heat-, shock-,chemical-resistant, neutral in odor, environment-friendly, incombustible and dimensionally stable. AEROPOR® 500 is suitable for use in products made of polyester-, epoxid-, phenolic resin and polyurethane, light-SMC and -BMC, glass fiber (GRP), under-seal and PVC-plastisols. AEROPOR® 180 by sh minerals is an alumino silicate. Acts as a filler. It stands out due to its low water requirement and its natural color. Exhibits low real density (range of 0.6-0.7 g/cm<sup>3</sup>), is pressure-resistant, free-flowing, inert, frost-, temperature-, heat-, shock-,chemical-resistant, neutral in odor, environment-friendly, incombustible and dimensionally stable. AEROPOR® 180 is suitable for use in products made of polyester-, epoxid-, phenolic resin and polyurethane, light-SMC and -BMC, glass fiber (GRP), under-seal and PVC-plastisols. AEROPOR® 2000 by sh minerals is an alumino silicate. Acts as a filler. It stands out due to its low water requirement and its natural color. Exhibits low real density (range of 0.6-0.7 g/cm<sup>3</sup>), is pressure-resistant, free-flowing, inert, frost-, temperature-, heat-, shock-,chemical-resistant, neutral in odor, environment-friendly, incombustible and dimensionally stable. AEROPOR® 2000 is suitable for use in products made of polyester-, epoxid-, phenolic resin and polyurethane, light-SMC and -BMC, glass fiber (GRP), under-seal and PVC-plastisols. AEROPOR® 1200 by sh minerals is an alumino silicate. Acts as a filler. It stands out due to its low water requirement and its natural color. Exhibits low real density (range of 0.6-0.7 g/cm<sup>3</sup>), is pressure-resistant, free-flowing, inert, frost-, temperature-, heat-, shock-,chemical-resistant, neutral in odor, environment-friendly, incombustible and dimensionally stable. AEROPOR® 1200 is suitable for use in products made of polyester-, epoxide-, phenolic resin and polyurethane, light-SMC and -BMC, glass fiber (GRP), under-seal and PVC-plastisols.
AEROPOR®
Polymer additives supplied by sh minerals
6 Products match your search
AEROPOR® 1000
by sh minerals
AEROPOR® 300
by sh minerals
AEROPOR® 500
by sh minerals
AEROPOR® 180
by sh minerals
AEROPOR® 2000
by sh minerals
AEROPOR® 1200
by sh minerals
Showper page