Return to supplier page
CN 307 by Sartomer (Arkema Group) is a polybutadiene diacrylate. It is a flexible and hydrophobic oligomer. Offers high impact strength, low shrinkage, good adhesion, good water- and chemical resistance. It has low viscosity and is based on high vinyl polybutadiene and may be incorporated into peroxide cured natural and synthetic rubber systems, where it improves mechanical and performance properties. Used in electronics. CN 307 complies with ECL (Korea) and ENCS (Japan). CN 120Z by Sartomer Arkema Group is a difunctional bisphenol A-based epoxy acrylate oligomer.<br>
<ul style="padding-left: 40px;"><li>It offers the lowest viscosity, good adhesion, chemical, water and abrasion resistance.</li><li>It provides a good balance of water properties and high reactivity.</li><li>It also provides good hardness to films.</li><li>It is used in electronics and computer.</li><li>It complies with AICS (Australia), ENCS (Japan), IECSC (China), PICCS (Philippines), NZIoC (New Zealand), DSL (Canada) and ECL (Korea).</li><li>CN 120Z has a shelf life of 6 months.</li></ul> CN 104Z by Sartomer (Arkema Group) is difunctional epoxy acrylate oligomer. Offers lowest color, chemical-, water- and abrasion resistance. It provides a good balance of water properties, good adhesion and high reactivity. Also provides hardness to films. Used in electronics. It complies with AICS (Australia), ENCS (Japan), IECSC (China), PICCS (Philippines), DSL (Canada), NZIoC (New Zealand) and ECL (Korea). CN 981B88 by Sartomer (Arkema Group) is an aliphatic polyester/polyether-based urethane diacrylate oligomer blended with 12% hexanediol diacrylate monomer. It is a highly flexible and has low viscosity. Provides an excellent balance of high
tensile strength and high elongation, along with a fast cure response. Also provides good adhesion, weatherability, low shrinkage, high impact strength, chemical-, heat-, water- and abrasion resistance. CN 981B88 complies with ENCS, ECL, NZIoC, IECSC, DSL, AICS and PICCS. CN 2910 by Sartomer (Arkema Group) is acrylic oligomer. It is a bisphenol A (BPA)-free clear liquid. CN 2910 exhibits good water resistance and offers fast cure response. Meets newer regulatory requirements and broad global international regulatory compliance. All components are on list A or B of Annex 6 in the 2011 Swiss Ordinance 817.023.21. Complies with TSCA (USA), DSL (Canada), EINECS (Europe), IECSC (China), ENCS (Japan), AICS (Australia) and PICCS (Philippines). CN 9062 by Sartomer (Arkema Group) is dual cure urethane acrylate oligomer. It is PETA-free and reactive with NCO due to its hydroxyl functionality. Offers good hardness, high glass transition temperature, weatherability and high impact strength. Exhibits good chemical, scratch, water and solvent resistance. Used in UV/EB and alternative curing mechanisms. CN 9062 complies with TSCA (United States Toxic Substances Control Act Section 8(b) Inventory). CN 111US by Sartomer (Arkema Group) is a difunctional epoxidized acrylate oligomer based on soy bean oil. Offers pigment wetting, high flexibility, good adhesion, high impact strength and low shrinkage. Used in the production of flexible, well-adhering free-radically cured films. CN 111US is recommended for polymer concrete. CN 9030 by Sartomer (Arkema Group) is an urethane acrylate oligomer. It offers negligible volatiles, adhesion, high flexibility, low shrinkage and high impact strength. CN 9030 provides corrosion-, chemical- and water resistance. Complies with EINECS (Europe). CN 120C80 by Sartomer (Arkema Group) is difunctional bisphenol A-based epoxy acrylate oligomer. It is blended with 20% trimethylol propane triacrylate. Offers lowest viscosity, chemical-, water- and abrasion resistance. It provides a good balance of water properties, good adhesion and high reactivity. Also provides good hardness to films. CN 120C80 used in electronics. Complies with AICS (Australia), ENCS (Japan), IECSC (China), PICCS (Philippines), DSL (Canada), EINECS (Europe), NZIoC (New Zealand) and ECL (Korea). CN 104A75 by Sartomer (Arkema Group) is a difunctional bisphenol A-based epoxy acrylate oligomer. It is blended with 25% tripropylene glycol diacrylate. Offers the lowest color, water-, chemical- and abrasion resistance. It provides a good balance of water properties, good adhesion and high reactivity. Also provides hardness to films, excellent gloss- and flow. CN 104A75 is used in electronics. Complies with AICS (Australia), ENCS (Japan), IECSC (China), PICCS (Philippines), DSL (Canada), NZIoC (New Zealand) and ECL (Korea).
CN
Polymer additives supplied by Sartomer (Arkema Group)