Return to supplier page
Urethane dimethacrylate (> 90 wt./ wt.%). It is a clear pale yellow liquid having low viscosity. Slightly soluble in water. Cures to form a light-colored, bisphenol A-free, hard, glassy surface. Used in both visible light and UV-curing applications. Complies with TSCA (Toxic Substance Control Act List), 21 CFR of FDA (Food and Drug Administration) and EINECS (European Inventory of Existing Commercial Chemical Substances). The main component of this product is listed on NDSL (Canadian Non-domestic Substance List). All other components are listed on DSL (Canadian Domestic Substances List). Urethane tetramethacrylate (70-100 wt./wt. %). It is a viscous liquid. Exhibits low color and low viscosity. Possesses increased cross-linking capacity. Forms polymers with high Shore D hardness values. Complies with TSCA (Toxic Substance Control Act List), EINECS, NDSL and DSL. Blend of bisphenol A glycidyl methacrylate and triethylene glycol dimethacrylate (70:30). Complies with TSCA (Toxic Substance Control Act List). Urethane dimethacrylate (70-100 wt./wt. %). It is a viscous liquid. Exhibits low color and low viscosity. Possesses the ability to re-adhere to itself after breaking. Provides improved flexibility to formulations. Complies with TSCA (Toxic Substance Control Act List), FDA and EINECS. The main component is listed on NDSL while other components are listed on DSL. Urethane dimethacrylate extended with PEG (polyethylene glycol) 400 (60-100 wt./wt. %). It is a clear pale yellow liquid. Exhibits low viscosity and low color. Cures to form a flexible polymer. Its addition increases fracture toughness of UDMA (urethane dimethacrylate). Commonly used in photo-cure applications. Complies with 21 CFR of FDA (Food and Drug Administration). Urethane dimethacrylate (80-100 wt./wt. %). It is a clear pale yellow liquid. Provides very low shrinkage values upon cure as well as good conversion and enhanced toughness. Exhibits high viscosity that enables it to be a rheological modifier in UV-curing formulations requiring improved mechanical properties. Forms a hard, tough and shiny homopolymer. Complies with TSCA (Toxic Substance Control Act List), 21 CFR of FDA (Food and Drug Administration) and EINECS. The main component is listed on NDSL while others are listed on DSL. Urethane dimethacrylate (70-100 wt./wt. %). It is a viscous liquid. Exhibits high flexibility on curing. Forms homopolymer which exhibits unique ability to re-adhere to itself at lower tensile strength. Complies with TSCA (Toxic Substance Control Act List), 21 CFR of FDA (Food and Drug Administration) and EINECS. The main component is listed on NDSL while others are listed on DSL. Urethane dimethacrylate (70-100 wt./wt. %). It is a viscous liquid at room temperature. Forms a soft, yet tough polymer. Complies with TSCA (Toxic Substance Control Act List), 21 CFR of FDA (Food and Drug Administration) and EINECS. The main component is listed on NDSL while others are listed on DSL. Urethane acrylate (70-100 wt. /wt. %). It is a very soft, rubber-like, clear viscous liquid. Possesses very high conversion and very low shrinkage. Complies with TSCA (Toxic Substance Control Act List), FDA, EINECS and DSL. Urethane acrylate (70-100 wt. /wt. %). It is a clear viscous liquid. Possesses high rate of conversion with low average shrinkage stress. Forms a tough polymer. Complies with TSCA (Toxic Substance Control Act List), FDA, EINECS and DSL.
EXOTHANE™
Polymer additives supplied by Esstech
10 Products match your search
EXOTHANE™ X-850-0000
by Esstech
EXOTHANE™ X-893-0000
by Esstech
EXOTHANE™ BisGMA:TEGDMA Blend (70:30)
by Esstech
EXOTHANE™ X-894-0000
by Esstech
EXOTHANE™ X-726-0000
by Esstech
EXOTHANE™ X-930-0000
by Esstech
EXOTHANE™ X-892-0000
by Esstech
EXOTHANE™ X-891-0000
by Esstech
EXOTHANE™ X-992-0000
by Esstech
EXOTHANE™ X-991-0000
by Esstech
Showper page