Return to supplier page
Doublemer® 88A by Double Bond Chemical is an aromatic urethane hexa-acrylate. Appearance is clear and clean. It is non-yellowing, exhibits high gloss, excellent cure response and excellent solvent resistance. It shows excellent pigment wetting and outstanding hardness & scratch resistance. Doublemer® 88A is suitable for photoimaginable solder masks. Doublemer® 278 by Double Bond Chemical is chlorinated polyester acrylate. It is a light-yellowish liquid. It has fast cure, exhibits good pigment wetting and excellent adhesion. Doublemer® 278 is suitable for PP, PE, PET and OPP. Doublemer® 7201M by Double Bond Chemical is an aromatic urethane dimethacrylate diluted in 25% IBOMA. It is a yellow transparent liquid. It exhibits excellent flexibility, excellent toughness and high elongation (>300%). Doublemer® 1702 by Double Bond Chemical is fatty acid modified bisphenol A epoxy diacrylate. Appearance is clear and clean. It possesses high gloss and higher flexibility than standard bisphenol A epoxy diacrylate. Doublemer® 1702 exhibits excellent water- & chemical-resistance and shows good flow & levelling. Doublemer® 287 by Double Bond Chemical is fatty acid modified polyester hexa-acrylate. It is a brown liquid. It shows fast cure response, good pigment wetting, exhibits good lithographic behavior, good abrasion- and solvent-resistance. Doublemer® 188 by Double Bond Chemical is a special modified epoxy acrylate. Appearance is clear and clean. It possesses high gloss, exhibits excellent solvent resistance, outstanding hardness and scratch resistance. Doublemer® PET(5EO)4A by Double Bond Chemical is an ethoxylated pentaerythritol tetraacrylate. It is a clear liquid. It possesses high reactivity, good flexibility and lower shrinkage than PETA. Doublemer® PET(5EO)4A is suitable for electronics for solder masks. Doublemer® 120 by Double Bond Chemical is 2-Hydroxy-3-phenoxypropyl acrylate. Appearance is clear and clean. It possesses low odor, low viscosity, low crosslink density and exhibits good adhesion. Doublemer® 120 is suitable for PP/PE applications. Doublemer® 345 by Double Bond Chemical is a full acrylic oligomer in HDDA & TPGDA. It is a clear liquid. It possesses good cure speed, good flexibility and exhibits good adhesion to difficult substrates. Doublemer® 345 is suitable for unsaturated polyester, polypropylene and polystyrene. Doublemer® BPA(2EO)DMA by Double Bond Chemical is an ethoxylated bisphenol-A dimethacrylate. It is a clear liquid. It possesses high reactivity, high refractive index, good hardness and low volatility. It has good impact strength, exhibits good adhesion, good water- and chemical-resistance. Doublemer® BPA(2EO)DMA is suitable for electronic photoresists and optical films.
DOUBLEMER®
Polymer additives supplied by Double Bond Chemical