BRUGGOLEN® (Polymer additives)

BRUGGOLEN® by Brüggemann is a portfolio of high-performance additives for engineering thermoplastics including PA, PET, PBT, and PP. The range includes stabilizers, processing aids, and recycling additives.

Key features of BRUGGOLEN® brand include:

Heat and light stabilization solutions
Processing optimization additives
Supports polymer recycling
Available as individual grades or “One-Packs”
Enhances production efficiency and durability

72 Products match your search

BRUGGOLEN® H10

by Brüggemann

BRUGGOLEN® H10 by Brüggemann is a phosphonate processing stabilizer and synergist. It not only protects against polymer degradation during processing, but also prolongs lifetime of polymers. It protects against yellowing under outdoor conditions and offers very low volatility. It is stable at highest processing temperatures and is very effective in the regeneration of fiber waste materials. Suited mainly for polyamides and polyesters, it can also be used as processing stabilizer against discoloration and degradation, co-stabilizer to antioxidant and in the polymerization of polyamides. BRUGGOLEN® H10 can be processed using extrusion, dry-blending and injection molding. The recommended dosage level is 0.1-0.3% and it has a shelf life of at least 12 months.

Sustainable option
Support available

See the product

BRUGGOLEN® H164

by Brüggemann

BRUGGOLEN® H164 by Brüggemann is a non-discoloring antioxidant and heat stabilizer. It is a synergistic mixture of sterically hindered phenolic antioxidants and phosphonates in powder form. Provides long term heat stability in applications up to 150°C, efficient process stabilization against yellowing and degradation. Exhibits low volatility during processing, no deposits (‘plate-out’) on the finished parts after conditioning, excellent compatibility and low extractability. It offers long term protection of bright colored polymers against yellowing, excellent protection against embrittlement and premature fatigue of the mechanical properties of the finished parts under long term stress, both in unreinforced and glass-fiber reinforced or mineral-filled polymers. BRUGGOLEN® H164 is compatible with all polyamides (PA6, PA6.6, PA11, PA12, PA–Copolymers). It can be processed using extrusion, dry blending and injection molding. Recommended dosage is 0.2-0.8%, depending on the polyamide and the desired properties of the finished parts. Shelf life of BRUGGOLEN® H164 is at least 12 months.

Sustainable option
Support available

See the product

BRUGGOLEN® H328F

by Brüggemann

BRUGGOLEN® H328F by Brüggemann is a mixture of copper compounds, halogen containing synergists and fatty acids derivates. Acts as a heat stabilizer and antioxidant. Provides cost effective performance optimized, long term protection against embrittlement under maximum service temperature stress, powerful protection against premature fatigue of mechanical properties under aggressive conditions caused by high temperatures, chemicals or weathering. The fine particle size leads to a very homogeneous dispersion in the compound and an efficient and consistent stabilization performance in comparison to standard products. Compatible with polyamides. BRUGGOLEN® H328F can be processed using extrusion, dry blending and injection molding. Recommended dosage is 0.2-0.6%. It has a shelf life of 12 months.

Support available

See the product

BRUGGOLEN® H3336

by Brüggemann

BRUGGOLEN® H3336 by Brüggemann is a mixture of copper compounds, halogen containing synergists and lubricant. Acts as a heat stabilizer and antioxidant for all polyamides (PA6, PA6.6, PA11, PA12, co-polyamides). Provides long-term stabilization against loss of mechanical properties up to 180°C, effective processing stabilization against polymer degradation, high extraction resistance against water, alcohols, fats, oils, glycols, organic solvents. Offers no deposits (‘plate-out’) on the surface of the finished parts, no negative influence on the electrical properties of the finished parts, maintenance of surface gloss over a long period of time, very little discoloration, also under heat aging conditions. BRUGGOLEN® H3336 can be processed using extrusion, dry blending and injection molding. Recommended dosage level is 0.2–1%. It has a shelf life of 12 months.

Support available

See the product

BRUGGOLEN® H320

by Brüggemann

BRUGGOLEN® H320 by Brüggemann is an efficient heat stabilizer and antioxidant for polyamides. It is a synergistic mixture of copper compounds, halides and lubricants. It provides excellent long-term protection of high performance polyamides against embrittlement, powerful protection against premature fatigue and high temperatures. Offers maintenance of surface gloss over a long period of time. It can be processed using compounding on twin screw extrusion machines, dry blending and injection molding. The recommended dosage of BRUGGOLEN® H320 is 0.2-0.6%. It has a shelf life of 12 months.

Support available

See the product

BRUGGOLEN® C20P

by Brüggemann

BRUGGOLEN® C20P by Brüggemann is 17% blocked diisocyanate in caprolactam. Acts as an activator in the anionic polymerization of caprolactam. It is used along with a catalyst, BRUGGOLEN® C10. It enables the production of homogenous polyamide cast parts of a reproducible high quality with short production cycles and at low casting temperatures. The dosage level of BRUGGOLEN® C20P is 0.5 - 1.5 wt%. The shelf life of the grade is at least 12 months.

Support available

See the product

BRUGGOLEN® P22

by Brüggemann

BRUGGOLEN® P22 by Brüggemann is a nucleating agent for polyamides. When it is added to the polymer melt, the amorphous powder is split into very fine particles. It offers improved mold release, dimensional stability and mechanical properties (increased tensile strength and stiffness). It provides reduced post-shrinkage and prevention of stress cracking of the finished product. It can be used in glass-fiber reinforced polyamides. Higher production rates are achieved due to reduced overall cycle time. BRUGGOLEN® P22 is suitable for processing by compounding on twin screw extrusion machines, dry blending and injection molding. Recommended dosage is 0.05-0.2%, depending on the polymer and the desired properties of the finished parts. It has shelf life of 12 months under (closed, dry, 25°C) conditions.

Support available

See the product

BRUGGOLEN® M1251

by Brüggemann

BRUGGOLEN® M1251 by Brüggemann is a highly reactive chain extender based on modified polyamide. It provides increased melt viscosity, improved impact strength and increased elongation at break in glass reinforced polyamides. It offers regeneration and transformation of polyamide fiber waste to higher quality extrusion grades, applicable for common technical parts at much lower price levels. It possess no influence on the homogeneity of the polyamide melt and no formation of gel structures. It is suitable for processing by injection molding and compounding on twin screw extrusion machines. The dosage level of the grade is 0.5-2.0%, depending on the basic polyamide and the desired properties of the finished parts. The shelf life of BRUGGOLEN® M1251 is 12 months under (sealed, dry, 25°C) conditions.

Support available

See the product

BRUGGOLEN® H161

by Brüggemann

BRUGGOLEN® H161 by Brüggemann is a synergistic mixture of sterically hindered phenolic antioxidants and phosphonates in powder form. Acts as a non-discoloring antioxidant and heat stabilizer. Provides excellent protection against embrittlement and premature fatigue of the mechanical properties of the finished parts under long term stress, both in unreinforced and glass-fiber reinforced or mineral-filled polymers. Offers long term heat stability in applications up to 150°C, efficient process stabilization against yellowing and degradation, low volatility during processing, excellent compatibility, low extractability, high efficiency especially in glass-fiber reinforced or mineral-filled polyamides, complete dispersion, giving clear transparent films and fibers, no deposits (‘plate-out’) in fiber spinning. BRUGGOLEN® H161 is compatible with polyamides (PA6, PA6.6, PA11, PA12, PA copolymers), but also in other thermoplastics such as polyesters (PET, PBT), polycarbonates (PC) and their blends, styrenics (PS, ABS, SAN) and polypropylene (PP). It can be processed using extrusion, injection molding and dry-blending. Recommended dosage is about 0.2-1.0%, depending on the polymer and the desired properties of the finished parts. It has a shelf life of at least 12 months.

Support available

See the product

BRUGGOLEN® H321

by Brüggemann

BRUGGOLEN® H321 by Brüggemann is a mixture of copper compound, halogen containing synergists and derivates of fatty acids. Acts as a heat stabilizer and antioxidant. Provides long-term protection of high performance polyamides against embrittlement under maximum service temperature stress and powerful protection against premature fatigue of mechanical properties under aggressive conditions caused by high temperatures, chemicals or weathering. Offers maintenance of surface gloss over a long period of time. BRUGGOLEN® H321 can be processed using injection molding, dry blending and compounding on twin screw extrusion machines. Recommended dosage is 0.2-0.6%. It has a shelf life of 12 months.