Return to supplier page
DYHARD® Fluid 212 by AlzChem is a latent liquid hardener & curing agent for filament winding in combination with DYHARD® RF2100 (formulated resin). It is a formulation of epoxy resin and curing agent. This additive offers extreme pot life, continuous winding operation, increased productivity, higher profitability and consistent viscosity in summer and winter. It provides reduction of cleaning time and resin waste, excellent mechanical properties and low enthalpy. It is suitable for wet fiber winding and towpreg. DYHARD® RF2100 by AlzChem is a formulation of epoxy resin and curing agent. It is a low viscous modified BPA epoxy resin. It is a formulated resin for filament winding in combination with DYHARD® Fluid 212 (formulated latent liquid hardener). It offers extreme long pot life, continuous winding operation, increased productivity, higher profitability and consistent viscosity in summer and winter. It provides reduction of cleaning time & resin waste, excellent mechanical properties and low enthalpy. DYHARD® RF2100 is suitable for wet fiber winding and towpreg. DYHARD® Fluid 111 by AlzChem is a liquid latent hardener & curing agent for thermosetting epoxy resins systems used in the composite industry, especially for vacuum infusion-, RTM-, pultrusion-, filament winding- and prepreg processes. It offers lower formulation viscosity, improved fiber wetting and excellent mechanical properties. This additive shows long latency up to several weeks. It is suitable for towpreg. DYHARD® RF1100 by AlzChem is a formulation of epoxy resin and curing agent. It is a formulated resin for resin transfer molding (RTM) in combination with DYHARD® Fluid 151 (formulated liquid hardener) & DYHARD® Fluid AC11 (formulated liquid accelerator). DYHARD® MCA10 by AlzChem is a premix of curing agent and accelerator. It offers easier handling and reduced risk on weighing errors in production. It is a formulated cure system for prepegs. DYHARD® URAcc57 by AlzChem is a high reactive accelerator for thermosetting epoxy resin systems used in the composite industry. This additive offers low toxicity and very good balance of reactivity and latency. It is easy to tune formulations. It is a perfect fit for prepegs and casting systems. It is ideal to accelerate DYHARD® curing agents. DYHARD® MI-FF by AlzChem is a highly reactive accelerator for thermosetting epoxy resin systems used in the electronic industry. This very economical additive is very effective in dosage. It offers medium shelf life in epoxy formulations. DYHARD® UR700 by AlzChem is a high latent accelerator for thermosetting epoxy resin systems used in the composite industry. It is ideal to accelerate DYHARD® curing agents. This additive offers low toxicity and very good balance of reactivity and latency. It is easy to tune formulations. It is a perfect fit for casting systems. DYHARD® MI-C by AlzChem is a highly reactive accelerator for thermosetting epoxy resin systems used in the electronic industry. It offers medium shelf life in epoxy formulations. This very economical additive is very effective in dosage. DYHARD® 100SF by AlzChem is a latent hardener & dicyandiamide-based curing agent for thermosetting epoxy resin systems used in the composite industry. It offers extraordinary long latency and cost effective dosage. This additive is not corrosive, hygroscopic and skin irritant. It provides highly cross-linked networks. It possesses low shrinkage & toxicity and no vapor pressure. It is ideal for towpreg, prepregs, laminates and casting systems.
DYHARD®
Polymer additives supplied by AlzChem