Moulex® (Polymer additives)
Supplied by Additek
Moulex® RI 77 by Additek is internal release agent for FKM, HNBR, ECO and NBR compounds. Improves injection and release properties. Moulex® RI 77 reduces mould fouling. Lowers viscosity.
Moulex® 352 by Additek is an internal mold release agent. For UP and VE pultrusion.
Moulex® TMPTMA 70 by Additek is a vulcanization co-agent on carrier silica. Offers increased mechanical properties with peroxide cured compounds. Exhibits increased resistance to solvents. Moulex® TMPTMA 70 provides improved compression set.
Moulex® 100 by Additek is free of silicone oil, external semi-permanent release agent. Offers high gliding effect. Possesses highly abrasive resistant properties. Ready to be used and allows obtaining a thin release coating without transfer to molded parts. Due to its composition Moulex® 100 also reduces mold fouling.
Moulex® RI 953 by Additek is a processing aid and internal lubricant. Improves release properties. Reduces mould fouling. Moulex® RI 953 exhibits high gliding effect.
Moulex® 77PD 70 by Additek acts as an antiozonant on carrier silica for natural and synthetic rubber.
Moulex® 154 NS by Additek is an internal mould release agent. Improves external release agent performances.
Moulex® EGDMA 70 by Additek is a vulcanization co-agent on carrier silica. Offers increased mechanical properties with peroxide cured compounds. Exhibits increased resistance to solvents.
Internal mould release agent. Improves the external release agent performances. Reduces external release agent applications and the mould fouling.
Processing aid and internal lubricant. Offers improved release and lubricating properties. Reduces internal friction. Exhibits increased injection properties.