Supplier Page
3M
OverviewProducts70Brands3Products families10News1

Dyneon™ (Polymer additives)

Supplied by 3M
Dyneon™ by 3M is a range of high molecular weight granular fluoropolymers designed to improve flame retardancy, melt strength, and surface durability of engineering plastics and rubbers.

Key features of Dyneon™ brand include:

  • Fibrillates during melt blending
  • Supports UL94 V-0 flame performance
  • Improves melt strength and sag resistance
  • Enhances viscosity control during processing
  • Increases mar and anti-drip resistance

17 Products match your search

Dyneon™ PTFE Micropowder TF 9205

by 3M

Dyneon™ PTFE Micropowder TF 9205 by 3M is a low molecular weight, PTFE-based excellent rheological modifier (thickening agent) for fluid systems and highly hydrophobic filler. It is produced by thermal degradation. This additive is based on rigid particle morphology.<br> <ul style="padding-left: 40px;"><li>It improves non-stick properties, reduces coefficient of friction and increases wear resistance of matrix material.</li><li>It exhibits very good metering behavior and can be easily incorporated into other materials even in dry blends.</li> <li>It lowers coefficient of friction when blended into other polymers or liquids and improves non-stick properties when blended into formulations.</li> <li>This additive offers broad chemical and thermal stability.</li> <li>It can be used to improve abrasion resistance.</li> <li>It increases viscosity when added to liquids and this feature is less temperature-dependent than many other modifiers.</li> <li>The typical volume loading quantity varies between <1% and 20% depending on the selected matrix and the desired properties.</li> <li>It is suitable for polyacetal, polyamide, polycarbonate, polyester, polyimide, polysulfide and polysulfone.</li> <li>It is also, used in fluoroelastomers, neoprenes, nitriles and silicones.</li><li>Dyneon™ PTFE Micropowder TF 9205 is used at concentrations typically from 5 to 20%.</li></ul>
See the product

Dyneon™ PA 5932

by 3M

Dyneon™ PA 5932 by 3M is perfluorocarbon resin. Used as an anti-drip in flame retardants. Has little or no effect on matrix material under routine processing conditions. Dyneon™ PA 5932 possesses broad chemical resistance and temperature range of use.
See the product

Dyneon™ PTFE Micropowder TF 9201Z

by 3M

Dyneon™ PTFE Micropowder TF 9201Z by 3M is a fine, low molecular weight PTFE micro powder. It acts as viscosity-modifying rheological additive. It exhibits easy de-agglomeration, increased degree of abrasion resistance and chemical resistance. <br> <ul style="padding-left: 40px;"><li>It has a large operating temperature range, good non-stick properties and reduced friction resistance.</li> <li>The typical additional quantity can vary between 1-20 %.</li> <li>It is recommended for use in a variety of plastics such as polyacetal, polyamide, polycarbonate, polyester, polyimide, polysulfide and polysulfone and elastomers such as fluor elastomers, neoprene, nitriles and silicones.</li> <li>Dyneon™ PTFE Micropowder TF 9201Z is U.S. Food and Drug Administration (FDA) approved up to 20% weight in polymer formulations.</li></ul>
  • Sustainable option
See the product

Dyneon™ PA 5954

by 3M

Dyneon™ PA 5954 by 3M is perfluorocarbon resin. Used for mar resistance in polyacetals, polyamides, polycarbonates, polyesters, polyimides, polysulfides, polysulfones, fluoroelastomers, neoprenes, nitriles and silicones. Dyneon™ PA 5954 improves non-stick properties.
See the product

Dyneon™ PTFE Micropowder TF 9202Z

by 3M

Dyneon™ PTFE Micropowder TF 9202Z by 3M is a fine, low molecular weight PTFE micro powder. Acts as viscosity-modifying rheological additive. Exhibits easy de-agglomeration, increased degree of abrasion resistance and chemical resistance. Has a large operating temperature range, good non-stick properties and reduced friction resistance. Typical additional quantity can vary between 1-20%. Dyneon™ PTFE Micropowder TF 9202Z is recommended for use in a variety of plastics such as polyacetal, polyamide, polycarbonate, polyester, polyimide, polysulfide and polysulfone and elastomers such as fluoroelastomers, neoprenes, nitriles and silicones. U.S. Food and Drug Administration (FDA) approved up to 20% weight in polymer formulations.
See the product

Dyneon™ PA 5951

by 3M

Dyneon™ PA 5951 by 3M is perfluorocarbon resin. Used for mar resistance in polyacetals, polyamides, polycarbonates, polyesters, polyimides, polysulfides, polysulfones, fluoroelastomers, neoprenes, nitriles and silicones. Reduces coeffecient of friction. Improves non-stick properties. Dyneon™ PA 5951 increases wear resistance of matrix material.
See the product

Dyneon™ FC 2110Q

by 3M

Dyneon™ FC 2110Q by 3M is di-polymer of vinylidene fluoride and hexafluoropropylene. Used as a viscosity modifier. Dyneon™ FC 2110Q offers ultra low viscosity.
See the product

Dyneon™ PA 5959

by 3M

Dyneon™ PA 5959 by 3M is a perfluorocarbon resin. Used as an anti-drip in flame retardants.
See the product

Dyneon™ PA 5934

by 3M

Dyneon™ PA 5934 by 3M is perfluorocarbon resin. Used as an anti-drip in flame retardants. Has little or no effect on matrix material under routine processing conditions. Possesses broad chemical resistance and temperature range of use, moderate fibrillation. Dyneon™ PA 5934 is easy to handle.
See the product

Dyneon™ PTFE Micropowder TF 9207Z

by 3M

Dyneon™ PTFE Micropowder TF 9207Z by 3M is an excellent rheological modifier (thickening agent) for fluid systems and highly hydrophobic filler. It lowers coefficient of friction when blended into other polymers or liquids and improves non-stick properties when blended into formulations. This additive offers broad chemical and thermal stability. It can be used to improve abrasion resistance. It increases viscosity when added to liquids and this feature is less temperature-dependent than many other modifiers. Dyneon™ PTFE Micropowder TF 9207Z can be added to elastomers. The typical volume loading quantity varies between < 1% and 20% depending on the selected matrix and the desired properties. It is suitable for polyacetal, polyamide, polycarbonate, polyester, polyimide, polysulfide and polysulfone. Also, used in fluoroelastomers, neoprenes, nitriles and silicones. It is FDA approved.
  • Sustainable option
See the product
Showper page

Most Popular Brands

3M™

by 3M

38 products
See All Products

Dyneon™

by 3M

17 products
See All Products

Dynamar™

by 3M

15 products
See All Products