Totally compatible with plasticisers as D.O.P. D.I.D.P, D.O.A etc and plate-out cases are not encountered.
When using extrusion techniques, external lubrication is provided by the addtion of stearic acid. The addtion of an epoxy plasticiser is recommended.
When using calendering techniques V Stab PV 100 is adequate. The use of external lubricating and epoxy plasticisers is recommended.
An optimum result is achieved when using V Stab PV 100 in 2 % ratio in injection molding. It is possible also to use it with a chlorinated auxiliary plasticiser without detrimental effects.
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
For which polymer
Availability
Product Status:Visible After Login
V Stab PV 100 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Refractive Index | 0.0 Visible After Login | Visible After Login | Visible After Login |