Technical datasheet
FluoroExtreme™ MS-2010
Supplied byMiller-Stephenson Chemical- Last Updated on Aug 24, 2025
FluoroExtreme™ MS-2010 by Miller-Stephenson Chemical can be used to lubricate valves, seals, O-rings, gaskets, bearings, sliding surfaces, threads and fixtures. The recommended temperature range for FluoroExtreme™ MS-2010 is less than -50°C to +50°C.
Product family:
Product Type:
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| CI Name | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Availability
Product Status:Visible After Login
FluoroExtreme™ MS-2010 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Evaporation Rate | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Penetration | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Penetration | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Oil Separation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Content | 0.0 Visible After Login | Visible After Login | Visible After Login |