SUPRMIX® CUMAR P-10 by Hallstar is a plasticizer and tackifier. It is used in rubber compounds.
- It is coumarone indene resin which possesses elimination of thick residue & drum disposal.
- Exhibits higher yield on usage and provides very good tack and green strength.
- Imparts reductions in batch weigh-up time.
- Used in mixing and extruding as low softening point and helps to lower high viscosities and to produce smoother extrusions.
- SUPRMIX® CUMAR P-10 provides building tack and green strength to un-vulcanized rubber to allow the uncured parts to hold some rigidity and shape.
- It can reduce waste and clean up time and eliminate the need for heating viscous liquid. It shows 80% reduction in VOCs compared with texanol.
Product Type:
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
No data available
Conversion mode
For which polymer
Availability
Product Status:Visible After Login
SUPRMIX® CUMAR P-10 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Ash Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flash Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |