Silcolapse® 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It is used for compounding natural or synthetic latex.
- Possesses low dose efficiency, of around 10 to 1000 mg per kg of the system to be defoamed.
- Exhibits good heat stability and can be heated to 120°C for 1 hour without modification of its characteristics or performance levels.
- Silcolapse® 426R is chemically inert with regards to the substance to be defoamed therefore leaving its properties unchanged.
- It can be used as delivered or pre-diluted in water or in the aqueous system to be defoamed.
- Silcolapse® 426R has 30% active matter content and is recommended for the prevention, control, or elimination of foam in aqueous systems.
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
For which polymer
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
Silcolapse® 426R properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Dry Matter Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Effective Concentration | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| pH | 0.0 Visible After Login | Visible After Login | Visible After Login |