Silicon-based Monomers for Plastic Compounds

3-Aminopropyltriethoxysilane by Nanjing Chemical Material is a silicone-based monomer. It is suitable for plastic products.

Silmer® VIN 65,000 by Siltech has linear di-functional silicone pre-polymer with reactive vinyl terminal end groups. Offers better slip, antilocking, mar resistance, surface smoothness, flexibility and hydrophobicity. Is compatible with polymers that contain reactive groups and systems such as epoxide, carboxylic acid, esters and isocyanates. Silmer® VIN 65,000 can co-reacted into various polymers for plastics. Typical usage levels are between 1.0 - 3.0% wt. It is listed with TSCA, DSL, EINECS, AICS, IECSC, MITI, KECL, NZIoC, CSNN, and PICCS.

SILBOND® 40 by Evonik is a concentrated form of available silica. It is a partially hydrolyzed mixture of monomers, dimers, trimers, and higher polymers. Average -Si-O-Si- chain length is approximately five. It is hydrolyzed in water and miscible with organic solvents. SILBOND® 40 is used in the manufacture of less concentrated, more highly hydrolyzed binders which are recommended for investment casting molds.

Silmer® ACR Di-2510 by Siltech is a cross-linkable silicone acrylate pre-polymer. Offers improved slip, anti-blocking, mar- & scratch resistance, surface smoothness and better release. Can be cross-linked into various polymers. Suitable for UV/EB cured systems for plastics. Silmer® ACR Di-2510 is listed with TSCA, DSL, EINECS, MITI, CSNN, AICS, IECSC, KECL, and NZIoC.

Tetrakis[(epoxycyclohexyl)ethyl]tetramethylcyclotetrasiloxane by BCH is a silicone-functionalized epoxide monomer. It exhibits high rigidity, glass transition temperature, transparency and good weather resistance. Tetrakis[(epoxycyclohexyl)ethyl]tetramethylcyclotetrasiloxane is recommended for use in cationic curable systems.

Bis[2-(3,4-epoxycyclohexyl)ethyl]tetramthyldisiloxane by BCH is a silicone-functionalized epoxide monomer. It is suitable for use in cationic curable systems.

1,2-Epoxy-4-(2-triethoxysilylethyl)cyclohexane by BCH is a silicone-functionalized epoxide monomer. It is used in cationic curable systems.

Silmer® NCO Di-50 by Siltech is a linear di-functional isocyanate terminated silicone pre-polymer. Can be co-reacted with an alcohol based polymer resulting in a silicone urethane polymer, and an amine based polymer resulting in a silicone polyurea polymer. Silmer® NCO Di-50 is listed with TSCA, DSL, EINECS, AICS, IECSC, MITI, KECL, NZIoC, CSNN, PICCS, WHMIS, and EEC.

High molecular weight tri-functional isocyanate silicone pre-polymer. Can be co-reacted with an alcohol based polymer resulting in a silicone urethane polymer, and an amine based polymer resulting in a silicone polyurea polymer. It is listed with TSCA, DSL, EINECS, AICS, IECSC, MITI, KECL, NZIoC, CSNN, PICCS, WHMIS, and EEC.

Silmer® NCO Di-100 by Siltech is a linear di-functional isocyanate terminated silicone pre-polymer. Silmer® NCO Di-100 can be co-reacted with an alcohol-based polymer resulting in a silicone urethane polymer and an amine-based polymer resulting in a silicone polyurea polymer.