Nanoparticles for Plastic Compounds

GrapheneBlack xGnP™ Masterbatch by NanoXplore is a graphene-enhanced masterbatch. It demonstrates more than 70% improvement in mechanical strength and may enable thickness reduction of up to 20% while maintaining tensile, tear, and puncture performance.

• It has the potential to increase the amount of recycled content that can be incorporated into film formulations without sacrificing performance.
• It ensures optimal graphene distribution for consistent and repeatable improvements.
• GrapheneBlack xGnP™ Masterbatch is particularly valuable for consumer packaging, agricultural films, and industrial wrap manufacturers who must meet strict regulatory thresholds for post-consumer recycled (PCR) content.

xGnP™ D500-HP by NanoXplore is a high-purity graphene powder. It delivers electrical conductivity and static-dissipation (ESD) performance comparable to leading conductive carbon blacks, while offering more than twice the flexural strength and stiffness.

• Produced by company's proprietary dry-process manufacturing platform.
• xGnP™ D500-HP is recommended for highly conductive applications, including but not limited to energy storage, conductive composites and advanced electronics.

NC7000™ by Birla Carbon is a thin multi-wall carbon nanotube produced via the catalytic carbon vapor deposition (CCVD) process. It is non-migrating, conductive additive for protection against electrical damage. It provides lowest particulate/dust emission, outgassing, non-volatile residue, and lowest ionic contamination. It contains no amide, DOP, or silicon oil.

• It ensures improved abrasion resistance, higher conductivity, and better static charge dissipation.
• Its low amount allows highest mechanical properties and optimal processability.
• It exhibits high cleanliness standards for IC, HDD, camera, and display applications.
• It can be compounded into all thermoplastics (HIPS, PP, MPPO, PC, PEEK, PEI).
• It can be used for packaging for the transport and storage of sensitive electric & electronic components that requires an electrically conductive material to avoid damage by electrostatic charges accumulation.
• NC7000™ is used in applications requiring low electrical percolation threshold such as high performance electrostatic dissipative plastics.
• It is also suitable for thermoformed trays, carrier tapes, injected carriers, small parts.

TUBALL™ MATRIX 204 by OCSiAl is a concentrate based on graphene nanotubes. It is specifically designed for solvent-free and solvent-based polyester & vinyl ester as well as solvent-based melamine & acrylic systems. It has blend of triethylene glycol dimethacrylate and ammonium salt of polyolefin-based derivatives as carrier.

• It ensures permanent and uniform electrical conductivity at ultra-low dosage without hot spots.
• It exhibits minimal impact on the rheological & mechanical properties of the host matrix, without a significant increase in viscosity or density.
• It allows production of conductive parts such as gelcoats that retain bright colors.
• It is applicable for anti-static SMC/BMC composites, anti-static fuel tanks & pipes, electrostatic discharge materials applied by coil coatings, and other applications where electrical conductivity is required.
• The recommended dosage level for anti-static or dissipative applications is as low as 0.1–4.0 wt.% calculated based on non-volatile matter.
• The shelf life of TUBALL™ MATRIX 204 is up to 24 months.

Elastocyl™ X1-Polyester Polyol MB by Birla Carbon is a high performance, di-functional and aliphatic polyester polyol masterbatch with multi-wall carbon nanotube (MWNT). Offers excellent surface finish and excellent electrical conductivity at low loading.

• Provides ease of processing.
• It shows improvements in key mechanical properties such as abrasion resistance.
• Prevents formation of skid marks.
• Designed to demonstrate the impact of optimized carbon nanotube (CNT) dispersions on elastomer performances.
• Possess homogeneous CNT dispersion which enables enhanced property development and allow customers to fully leverage the benefits.
• It is compatible with conventional filler systems which reduces the need for extensive reformulation and accelerates the customers product innovation.
• Elastocyl™ X1-Polyester Polyol MB is recommended for ESD (electrostatic discharge) and electrically conductive parts.
• It is also suitable for automotive, railway, industrial and energy applications.

Epocyl™ 128-05 by Birla Carbon is a high-performance masterbatch formulated on a liquid Bisphenol-A (Bis-A) epoxy resin and loaded with Nanocyl’s multi-wall carbon nanotube (MWNT) NC7000™.

• Enables a reliable and efficient route to electrical conductivity enhancement in epoxy formulations.
• Offers outstanding formulation flexibility with easy integration.
• Provides ease of formulation and has a limited impact on mechanical and thermo-mechanical properties of the base resin.
• It acts as a lead-free alternative.
• It can be processed in pure hot-melt conditions without solvent.
• Epocyl™ 128-05 is recommended for conductive primers.

Elastocyl™ HTV1003 by Birla Carbon is a silicone masterbatch loaded with 10 wt% of Nanocyl’s multi-wall carbon nanotube (MWNT) NC7000™. It is a high-performance vinyl terminated silicone HTV (high temperature vulcanization).

• Offers high anti-static or dissipative performance.
• Possess high tinting power and excellent electrical conductivity at low loading.
• It has large compound formulations flexibility which can be adjusted to other properties while maintaining high conductivity.
• Designed to demonstrate the impact of optimized carbon nanotube (CNT) dispersions on elastomer performances.
• Possess homogeneous CNT dispersion which enables enhanced property development and allow customers to fully leverage the benefits.
• It is compatible with conventional filler systems which reduces the need for extensive reformulation and accelerates the customers product innovation.
• It shows full compatibility and functional dispersions into the silicone elastomer matrix.
• Elastocyl™ HTV1003 is recommended for electrical and electronics (E&E), automotive and packaging industries.

Elastocyl™ X1-FKM MB by Birla Carbon is a high performance FKM masterbatch based on a copolymer gum to be bisphenol cured. It is loaded with 20 wt% of Nanocyl’s multi-wall carbon nanotube (MWNT) NC7000™. Offers excellent surface finish and excellent electrical conductivity at low loading.

• It is free from curing agent and provides ease of processing.
• It shows retention of key mechanical properties.
• It also offers increased abrasion resistance, UV resistance and gas decompression resistance.
• Designed to demonstrate the impact of optimized carbon nanotube (CNT) dispersions on elastomer performances.
• Possess homogeneous CNT dispersion which enables enhanced property development and allow customers to fully leverage the benefits.
• It is compatible with conventional filler systems which reduces the need for extensive reformulation and accelerates the customers product innovation.
• Elastocyl™ X1-FKM MB is recommended for ESD (electrostatic discharge) and electrically conductive parts.
• It is also suitable for automotive, railway and oil drilling applications.

Elastocyl™ X1-NBR MB by Birla Carbon is a high performance butadiene-acrylonitrile copolymer masterbatch loaded with 20 wt% of Nanocyl’s multi-wall carbon nanotube (MWNT) NC7000™. Offers excellent surface finish and excellent electrical conductivity at low loading.

• Provides ease of processing.
• It shows retention of key mechanical properties.
• Designed to demonstrate the impact of optimized carbon nanotube (CNT) dispersions on elastomer performances.
• Possess homogeneous CNT dispersion which enables enhanced property development and allow customers to fully leverage the benefits.
• It is compatible with conventional filler systems which reduces the need for extensive reformulation and accelerates the customers product innovation.
• Elastocyl™ X1-NBR MB is recommended for ESD (electrostatic discharge) and electrically conductive parts.
• It is also suitable for automotive, railway, industrial and energy applications.

Elastocyl™ X1-IR MB by Birla Carbon is a high-performance polyisoprene polymer masterbatch loaded with 20 wt% of Nanocyl’s multi-wall carbon nanotube (MWNT) NC7000™. Offers excellent surface finish and excellent electrical conductivity at low loading.

• Provides ease of processing.
• It shows retention of key mechanical properties.
• Designed to demonstrate the impact of optimized carbon nanotube (CNT) dispersions on elastomer performances.
• Possess homogeneous CNT dispersion which enables enhanced property development and allow customers to fully leverage the benefits.
• It is compatible with conventional filler systems which reduces the need for extensive reformulation and accelerates the customers product innovation.
• Elastocyl™ X1-IR MB is recommended for ESD (electrostatic discharge) and electrically conductive parts.
• It is also suitable for automotive, railway, industrial and energy applications.