HDT / Vicat Enhancers for Plastic Compounds

NORYL™ SA120 is a low molecular weight polymer based on polyphenylene ether(PPE). It is intended for use as an additive in a variety of materials like styrene-based rubbers and block copolymers, epoxies, phenolics, polyurethanes and unsaturated polyesters. Adding NORYL™ SA120 to these systems may improve thermal performance (glass transition temperature), adhesion at elevated temperatures, toughness, dimensional stability, chemical resistance to acids and bases, moisture absorption, and electrical properties (dielectric constant, dissipation factor). It is available in Asia.

NORYL™ PPE POWDERS + CONCENTRATES 640 is a medium-high molecular weight polymer based on polyphenylene ether (PPE). This material is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers such as styrenic block copolymers. NORYL™ PPE POWDERS + CONCENTRATES 640 can be used to improve properties (i.e. heat distortion and creep resistance). It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. It complies with the FDA regulation 21CFR 177.2460 and EU Directive 2002/72/EC. It is available in Asia.

NORYL™ SA90 is a low molecular weight bi-functional oligomer with increased hydroxyl functionality based on polyphenylene ether (PPE). It can be used as a reactive component in epoxy, cyanate ester, and urethane thermosets in electronics and composites applications. It has outstanding solubility in toluene & methyl ethyl ketone(MEK) and a low solution viscosity. Targeted application areas include enhancing the performance (e.g. thermal, dielectric, mechanical, flame retardancy, and moisture uptake properties) of epoxy resins used in electronic packaging which include PCB laminates, copper clad laminates, epoxy prepregs as well as various other composites applications. NORYL™ SA90 can also be blended with thermoplastic elastomers and cured elastomers to enhance properties. It is available in Asia.

XIRAN® IZ1018M by aurorium is an amorphous thermoplastic random SMANPMI (styrene-maleic anhydride n-phenyl maleimide) terpolymer-based HDT/Vicat enhancer. Increases thermal and dimensional stability, surface adhesion properties and melt viscosity in a number of engineering polymer systems, specifically in styrenics like ABS (acrylonitrile butadiene styrene).

• XIRAN® IZ1018M can be processed in all types of regular polymer processing equipment and can be added to compounding extruder through regular feeder systems.
• Twin screw extruders with a mild screw configuration and vacuum degassing facility are recommended to enable good dispersion.
• It can be used with dosage levels up to 20%.

NORYL™ Resin 6850H by SABIC is polyphenylene ether resin concentrate with high impact polystyrene. It has high thermal resistance. It is optimized for blending with polystyrene resins. It has potential use in sheet/foil extrusion, food packaging (microwavable), additive in thermoplastics and thermoplastic elastomers, EPS. NORYL™ Resin 6850H is approved for use in contact with foodstuffs according to US and European food contact regulations.

XIRAN® IZ0721M by aurorium is an amorphous thermoplastic random SMANPMI (styrene-maleic anhydride N-Phenylmaleimide) terpolymer. Acts as an HDT/Vicat enhancer. Increases thermal and dimensional stability, surface adhesion properties and melt viscosity in a number of engineering polymer systems, specifically in styrenics like ABS (acrylonitrile butadiene styrene). XIRAN® IZ0721M can be processed in all types of regular polymer processing equipment and can be added to a compounding extruder through regular feeder systems. Twin screw extruders with a mild screw configuration and vacuum degassing facility are recommended to enable good dispersion.

NORYL™ Resin 6390H by SABIC is polyphenylene ether resin concentrate with polystyrene. It improves properties like heat distortion and creep resistance. It has a thermal HDT resistance of 170°C. It is optimized for blending with high-impact polystyrene (HIPS) and general-purpose polystyrene (GPPS). Used as an additive or as a building block in a variety of thermoplastics and thermoplastic elastomer like styrenics block copolymers. It has potential use in sheet/foil extrusion, food packaging, additive in thermoplastics and thermoplastic elastomers, EPS. NORYL™ Resin 6390H is approved for use in contact with foodstuffs.

Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE). It is a medium high molecular weight polymer based on polyphenylene ether (PPE). It improves properties like heat distortion and creep resistance. It is hydrolytically stable and non-hydroscopic. It is soluble in common organic solvents like toluene, chloroform and THF. Used as an additive or as a building block in a variety of thermoplastics and thermoplastic elastomer like styrenics block copolymers. It has potential use in sheet/foil extrusion, food packaging, additive in thermoplastics and thermoplastic elastomers. It complies with the FDA regulation 21CFR 177.2460 and EU Directive 2002/72/EC.

Polyphenylene ether resin concentrate with polystyrene. It improves properties like heat distortion and creep resistance. It has a thermal HDT resistance of 170°C. It is optimized for blending with high-impact polystyrene (HIPS) and general-purpose polystyrene (GPPS). Used as an additive or as a building block in a variety of thermoplastics and thermoplastic elastomer like styrenics block copolymers. It has potential use in sheet/foil extrusion, food packaging, additive in thermoplastics and thermoplastic elastomers, EPS. It is approved for use in contact with foodstuffs.

Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE). It is a high molecular weight polymer based on polyphenylene ether (PPE). It improves properties like heat distortion and creep resistance. It is hydrolytically stable and non-hydroscopic. It is soluble in common organic solvents like toluene, chloroform and THF. Used as an additive or as a building block in a variety of thermoplastics and thermoplastic elastomer like styrenics block copolymers. It has potential use in sheet/foil extrusion, food packaging, additive in thermoplastics and thermoplastic elastomers. It complies with the FDA regulation 21CFR 177.2460 and EU Directive 2002/72/EC.