All Flame Retardants / Smoke Suppressants for Plastic Compounds

CHARGUARD™ 2000 by Elementis is an organically modified mineral thickener. It is suitable for suitable for compounding in combination with fire retardants in low to intermediate polarity thermoplastic resin systems. It does not contain intentionally added per- and polyfluoroalkyl substances (PFAS).

• It enhances the effectiveness of non-halogenated and halogenated fire retardants by delaying the combustion process and stopping the spread of molten flame drip.
• It creates char layer oxygen barrier which is non-flammable and reduces the availability of combustible gases generated during thermal decomposition.
• It reduces the amount of smoke produced in a fire, which is a significant factor in improving fire safety and survivability.
• It is suitable for halogen-free flame retardant thermoplastic compounds such as ethylene-vinyl acetate co-polymer (EVA), low density polyethylene (LDPE), high impact styrene (HIPS), polypropylene (PP), polyamide (nylon 6) and polylactic acid (PLA).
• Recommended dosage level is 3.5%-5% as supplied based on total formulation weight.
• CHARGUARD™ 2000 has a shelf life of 4 years.

CHARGUARD™ 2010 by Elementis is an organically modified special lamellar silicate used as a flame-retardant synergist. It improves the mechanical properties of thermoplastic materials.

• It does not contain intentionally added per- and polyfluoroalkyl substances (PFAS).
• Enhances gas barrier and reduces heat release rate to achieve the synergistic effect of flame retardant.
• Its unique functional groups strengthen the inorganic structure, increases char formation efficiency, enhances the density & strength of carbon layer and inhibit dripping.
• It lowers aluminum hydroxide and magnesium dosage in polymers.
• It is suitable for halogen-free flame-retardant thermoplastic compounds such as ethylene-vinyl acetate co-polymer (EVA), low density polyethylene (LDPE), high impact styrene (HIPS), polypropylene (PP), polyamide (nylon 6) and polylactic acid (PLA).
• Recommended dosage level is 1%-5% as supplied based on total formulation weight.
• It is suitable for automotive, household, recycled and flame-retardant plastic applications.
• CHARGUARD™ 2010 has a shelf life of 4 years.
• It is ISO 9001 certified.
• Complies with USA (TSCA), EU (EINECS), Canada (DSL), Japan (ENCS), Philippines (PICCS), Korea (KECL), China (IECSC), Australia (AICIS), New Zealand (NZIoC) and Taiwan (TCSI)
  

CHARGUARD™ 1000 by Elementis is an off-white organically modified mineral thickener. It is suitable for thermoplastic melt extrusion compounding applications in combination with non-halogenated fire retardants. It does not contain intentionally added per- and polyfluoroalkyl substances (PFAS).

• It enhances the effectiveness of non-halogenated and halogenated fire retardants by delaying the combustion process and stopping the spread of molten flame drip.
• It creates char layer oxygen barrier which is non-flammable and reduces the availability of combustible gases generated during thermal decomposition.
• It reduces the amount of smoke produced in a fire, which is a significant factor in improving fire safety and survivability.
• It is suitable for halogen-free flame retardant thermoplastic compounds such as ethylene-vinyl acetate co-polymer (EVA), low density polyethylene (LDPE), high impact styrene (HIPS), polypropylene (PP), polyamide (nylon 6) and polylactic acid (PLA).
• Recommended dosage level is 3.5%-5% as supplied based on total formulation weight.
• CHARGUARD™ 1000 has a shelf life of 4 years.

ADINS® Clay 20 by Tolsa acts as a flame retardant. It is an organomodified, high purity, ultrafine and naturally occurring needle-like silicate based on quaternary ammonium salt. It strongly boosts char formation during combustion and protects polymer from further fire propagation. It is a free-flowing powder. ADINS® Clay 20 is suitable for different substrates, including thermoplastics and elastomers.

ADINS® Clay 80T by Tolsa is an organomodified, high purity, ultrafine natural silicate-based flame retardant. It strongly boosts char formation during combustion and protects polymer from further fire propagation. Offers tailored performance benefits and improved processability. Offers the advantages of an inorganic halogen-free technology which guarantees no additional toxic fume formation and minimal environmental impact. It improves the thermal and fire insulation properties of extruded polystyrene foams (XPS). It improves the cellular structure in XPS foams with lower cell size, higher cell density, lower open cell content and higher cell size homogeneity. ADINS® Clay 80T is used in wire and cable and electronics. Its typical dosage level is 1-5%.

SILMAFLAME AV2565 by Silma is a highly concentrated, synergistic anti-dripping agent, especially designed to be used in halogen-free, flame retardant compounds.

• It is compatible with additives like color masterbatches, crosslinking catalysts, maleic and silane coupling agents, UV-stabilizers and peroxides.
• It is designed to improve the performance of compounds in cables during EN 50399 fire test for CPR (Construction Production Regulation).
• SILMAFLAME AV2565 reduces dripping without affecting neither mechanical properties nor electrical properties.
• It is also suitable for ATH and MDH filled PE, EVA and rubber compounds designed for cable applications.
• The recommended dosage level is 2-6% in insulation and sheathing compounds.
• It has a shelf life of one year.

SILMAPROCESS AL2660 by Silma is a highly concentrated masterbatch of super-high molecular weight functionalized polysiloxane, finely and synergistically dispersed on LLDPE carrier.

• It is used in halogen-free compounds as a processing aid, improving viscosity and homogeneity.
• It acts as a flame-retardant synergist (L.O.I.) and smoke suppressant, while also eliminating surface defects and die drool.
• It works as a slipping agent, external lubricant, and releasing agent during cable extrusion.
• It improves mechanical properties and surface quality of the finished goods.
• It reduces melt viscosity during compounding, enhancing throughput, stability, compound homogeneity.
• SILMAPROCESS AL2660 reduces THR (Total Heat Release) and PHRR (Peak Heat Release Rate) in halogen-free compounds and serves as a scratch and abrasion resistance enhancer in polyolefin and rubber compounds.
• The recommended dosage for the processing aid is 0.5-1%, while for extrusion or injection molding processes is 0.5-5%.
• It has a shelf life of one year.

ADINS® Clay SIL-1 by Tolsa is an organically modified, high purity, ultra-fine and natural occurring needle-like silicate. Product is available on request in different coated versions. ADINS® Clay SIL-1 works synergistically with most of flame retardants on polymeric systems, strongly boosting char formation during combustion and protecting polymer from further fire propagation. ADINS® Clay SIL-1 is suitable for different substrate such as thermoplastics & elastomers (specially for silicones, PVC, PC) and others under development.

ADINS® Fireproof 80T by Tolsa acts as a flame retardant. It reduces the fire propagation by burning polymer dripping, enhancing the flame retardancy, minimizing the heat release and improving the integrity of the material by means of a very stable, consistent and compact char layer. Offers tailored performance benefits and improved processability. Imparts the advantages of an inorganic halogen-free technology which guarantees no additional toxic fume formation and minimal environmental impact. ADINS® Fireproof 80T is used in cables (conventional cables and emergency, alarm or safety cables), tools and structures (fire resistant structures, system boxes, emergency boxes and tools) and construction (plastic based wall panels, skylights/dormers, resin floors) and insulation (fireproof foams).