Conductive Fillers & Fibers for Plastic Compounds

StanoStat A20W by Keeling & Walker is antimony-doped tin oxide, conductive filler. This aqueous colloidal dispersion is used for near-infrared absorbing polymer films. It provides high electrical conductivity and excellent absorption of infrared light at an excellent price to performance ratio. It is used for reheating applications in PET processing, 3D printing or powder sintering. StanoStat A20W is suitable for high end solar control films for automotive & residential applications, or in agricultural films.

StanoStat CPM10C by Keeling & Walker is a non-flammable, infrared filter. This antimony doped tin oxide is designed as a conductive filler which may be milled to an ultrafine particle size. StanoStat CPM10C provides electrically conductive and infrared reflective/absorptive properties. It is available as a blue powder or as nano dispersion.

ACPS high solid distributed by DKSH is a special blend of ultra-high exfoliated graphite/NPG and carbon black present in a paste form. It is easy to disperse in polyester resins (UPUR) and epoxy vinyl ester (EVER) and imparts thermal and electric conductivity.

• It allows reaching the system's percolation threshold at low dosage levels.
• Recommended dosage level is 3-6% over resin.
• ACPS high solid has a shelf life of 12 months.
• This product is available in Asia Pacific markets and North America.

ENSACO® 250 G by Imerys is a conductive carbon black-based filler. It has a low surface area & high structure and is available in the form of granules as well as powder. It enables resistance to shear, conductivity. It shows very good purity and excellent electrical/mechanical balance. It offers very good dispersibility, excellent surface smoothness and very low water absorption. ENSACO® 250 G is suitable for electronic components, films, automotive industry, transport, computer, health, antistatic flooring, heating element, sensors, PTC switch, UV protection and pigmentation. It provides easy compounding and processing with high extrusion throughput. It is recommended for HDPE, PP, LDPE, PC, non-conducting applications, few conductive compounds such as seals, shoe soles, NBR conductive hose compounds and CR conveyor belts. It is used in semicon compounds (EEA/EBA) for conductor and easily strippable insulation shields (blends of EVA and NBR).

BCD6107UP by Birla Carbon is a furnace carbon black. It can be used as an additive or filler in plastics and rubber, as well as a pigment and chemical reagent. BCD6107UP is also recommended for use in refractories and various other applications. Available in pellet and powder form.

Boron nitride. Acts as a filler. It is a high purity single crystal grade with a very low surface area. This combination of features makes PT110 an outstanding filler that may improve the thermal conductivity of polymer resins, as it can be loaded to high levels and still give good flow performance. It is non wetting, lubricious, inert and chemically stable thermal conductor and electrical insulator. Has low dielectric constant/loss and high temperature stability. It may offer benefits to a variety of electronics applications. Potential uses include, but are not limited to phase change thermal interface materials, tapes, films and pads, thermal greases or gels, potting, encapsulants and thermally conductive plastics.

SN-100P by Ishihara Sangyo Kaisha acts as an electro-conductive filler. It is composed of antimony-doped tin oxide (SnO₂/Sb) with a particle size of approximately 0.02 µm. It contains ultrafine electro-conductive particles of tin oxide.

• SN-100P shows excellent electro-conductivity and transparency.
• It can also be used for heat-shielding applications due to its excellent near-infrared absorption properties.

SN-102P by Ishihara Sangyo Kaisha acts as an electro-conductive filler. It contains ultrafine electro-conductive particles of tin oxide. It is composed of antimony-doped tin oxide (SnO₂/Sb) with a particle size of approximately 0.02 µm. SN-102P shows excellent electro-conductivity and transparency.

FS-10D by Ishihara Sangyo Kaisha is an electro-conductive filler. It is a fine acicular, transparent tin oxide with electro-conductivity. It is a water-dispersible grade doped with antimony. It is suitable for anti-electrostatic plastics.

CoolFlow Boron Nitride Powder CF600 by Momentive Performance Materials acts as a filler. It is a high purity single crystal grade and is flexible enough to fulfill a wide range of advanced material applications. Its mean particle size is 12µm, which makes this grade is an excellent candidate to consider for thin film applications. It is non wetting, lubricious, chemically stable thermal conductor and electrical insulator. It has low density and high temperature stability. It may offer benefits to a variety of electronics applications. CoolFlow Boron Nitride Powder CF600 potential uses include LED lighting fixtures, consumer electronic devices, aerospace, automotive cooling systems, motor and battery housings, temperature sensors and heat exchangers.